View E32-L24S_1279058.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

e32-series fiber units amplifier units omron's fiber sensors continue to support an increasing range of applications. this catalog brings you the latest information on our fiber units. fiber sensors best selection catalog e3x-da-s/-mda series e3x-na series csm_e32series_ds_e_10_1
choose the model that suits the installation space from a wide variety of shapes and sizes. a wide variety of shapes for adapting to different installation locations flexible, pliable fiber that can be handled like wire first, our standard lineup f i r s t , o u r s t a n d a r d l i n e u p these fibers units can be used in a variety of applications, such as detecting the presence of workpieces and positioning. flat model you will certainly appreciate the ease of use that flexible fiber ensures. flexible fiber conventional fiber detect workpieces in tight spaces custom-produced sleeves length can be specified in 1-m units saving energy and work space savings and simple mounting flat models models with sleeves standard models s t a n d a r d m o d e l s p6 d e t e c t i o n w i t h i n c r e a s e d r e l i a b i l i t y s p e c i a l - b e a m m o d e l s f i b e r u n i t s f o r t h e f o o d - p a c k a g i n g , s e m i c o n d u c t o r , a n d f p d i n d u s t r i e s h i g h r e s i s t a n c e t o e x t e r n a l c o n d i t i o n s w i t h f i b e r e n v i r o n m e n t - r e s i s t i v e m o d e l s a p p l i c a t i o n - c o r r e s p o n d i n g m o d e l s flat models that allow simple screw mounting and straightforward wiring have been added to the lineup. using these models eliminates the problem of fibers getting caught on surrounding objects. models with sleeves allow detection in tight spaces. we will perform the time-consuming task of fashioning the sleeve, with a length and bends to suit the space (except for ultrafine sleeves). we have developed a broad range of fibers to meet a wide variety of needs. multicore (flexible) fiber is a new type of standard fiber that can be used like wire without worrying about the bending radius. we have also produced fiber that will not break when used in moving parts and fiber that is not degraded by contact with oil. we will produce fiber of the required length (in meter units). for large-scale installations, specifications of up to 20 m can be handled. (specifications of 0.3 m and 0.5 m are also possible.) screw-shaped cylindrical flat equipped with sleeve right angle
f i r s t , o u r s t a n d a r d l i n e u p label-detection models e32-g14 alignment-check models e32-l16 liquid-level detection models e32-d36t heat-resistant models chemical-resistant models small-spot models e32-c42+ e39-f3a area-sensing models e32-t16j limited-reflective models e32-l24l high-power models e32-t17l s t a n d a r d m o d e l s detection with increased reliability d e t e c t i o n w i t h i n c r e a s e d r e l i a b i l i t y a variety of heads incorporating the latest optical technology makes it possible to solve common problems related to detection and to increase reliability. special-beam models s p e c i a l - b e a m m o d e l s p10 fiber units for the food-packaging, f i b e r u n i t s f o r t h e f o o d - p a c k a g i n g , semiconductor, and fpd industries s e m i c o n d u c t o r , a n d f p d i n d u s t r i e s these models, which were developed for specific applications, offer top-quality detection performance. p16 high resistance to external h i g h r e s i s t a n c e t o e x t e r n a l conditions with fiber c o n d i t i o n s w i t h f i b e r we have developed model variations for adapting to a variety of environmental conditions. these models enable detection in high-temperature environments and vacuums. environment-resistive models e n v i r o n m e n t - r e s i s t i v e m o d e l s p14 application-corresponding models a p p l i c a t i o n - c o r r e s p o n d i n g m o d e l s resistant to dust and dirt capable of detecting small workpieces resistant to workpiece vibration use these models to handle unstable detection conditions. high-temperature environments environments subject to the splattering of chemicals vacuums use these models to handle applications in special environments. label detection liquid-level detection alignment and mapping of glass substrates wafer mapping use these models for specific applications. page reference type page 6 page 8 page 19 page 37 page 40 page 26 page 48 page 10 page 22 page 38 page 43 page 29 page 51 page 14 page 24 page 39 page 46 page 32 page 56 page 16 page 33 page 39 page 57 page 25 page 47 page 35 page 60 feature/ applications variations type ratings and performance dimensions standard models special-beam models environment resistant models application- corresponding models accessories --- --- --- --- --- through- beam reflective through- beam reflective through- beam reflective (vacuum- resisitant) --- (vacuum- resisitant) through- beam reflective through- beam reflective through- beam reflective
4 selection guide fiber units amplifier units detection conditions environmental conditions high-temperature environ- ments (up to 400oc) environments subject to scat- tering of chemicals and oil vacuum environments workpiece presence positioning level differences and marks standard models p.6 environment-resistive models p.14 long-distance sensing, resistance to dust and dirt small beam, resistance to rattling detection of transparent objects special-beam models p.10 labels liquid level alignment and mapping of glass sub- strates wafer mapping application-corresponding models p.16 type digital manual appearance response time 48 s, 1 ms, or 4 ms (2-output models: 80 s, 1 ms, or 4 ms) 100 s, 1 ms, or 4 ms 200 s (high-speed models: 20 s) light source red, green, blue, or infrared led red or green led function dual display (including digital, bar, percent, and hold display functions) threshold adjustment performed manually or by teaching off-delay, on-delay, one-shot timer (adjustable from 1 ms to 5 s) led bar display (5 levels) 8-turn sensitivity adjuster off delay timer (fixed at 40 ms) advanced-function models are available (2-output/input models). water-resistant models are available. models e3x-da @ -s e3x-da @ tw-s (2-output model) e3x-da @ rm-s (input model) e3x-mda @ e3x-na @ e3x-na @ f (high-speed model) e3x-na @ v (water-resistant model) fiber units amplifier units standard environments special environments standard detection workpiece p resence positioning level differences marks workpiece p resence positioning level difference special- beam high power small spot area sensing retroreflective sensing application- corresponding labels liquid level alignment mapping 2-channel models we have developed model variations for handling a broad range of applications.
5 contents selection guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p4 overview of features, applications, and variations standard models flexible (new standard) . . . . . . . . . . . . . . . . . . p6 standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p6 break-resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . p6 fluorine coating . . . . . . . . . . . . . . . . . . . . . . . . . . p7 special-beam models long distance, high power . . . . . . . . . . . . . . p10 ultracompact, ultrafine sleeve . . . . . . . . . . . . . . p10 coaxial, small spot . . . . . . . . . . . . . . . . . . . . . . . p11 fine beam (narrow vision field) . . . . . . . . . . . . p12 area sensing. . . . . . . . . . . . . . . . . . . . . . . . . . . . p12 retroreflective . . . . . . . . . . . . . . . . . . . . . . . . . . . p13 limited-reflective . . . . . . . . . . . . . . . . . . . . . . . . . p13 environment-resistive models heat-resistant . . . . . . . . . . . . . . . . . . . . . . . . . . p14 chemical-resistant. . . . . . . . . . . . . . . . . . . . . . . . p14 vacuum-resistant . . . . . . . . . . . . . . . . . . . . . . . . p15 application-corresponding models label detection . . . . . . . . . . . . . . . . . . . . . . . . . p16 liquid-level detection . . . . . . . . . . . . . . . . . . . . . p16 glass-substrate alignment . . . . . . . . . . . . . . . . . p17 glass-substrate mapping . . . . . . . . . . . . . . . . . . p17 water mapping . . . . . . . . . . . . . . . . . . . . . . . . . . p18 ordering information through-beam fiber units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p19 fiber units with reflective sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p26 application-corresponding fiber units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p33 ratings/characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p37 dimensions through-beam fiber units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p40 fiber units with reflective sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p48 application-corresponding fiber units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p57 precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p63
6 features/applications feature: multicore (flexible) fibers a large number of ultrafine cores are all surrounded by cladding. as a result, the fiber is flexible and can be bent without significantly reducing the light intensity. this helps solve problems, such as fiber being broken by get- ting caught on other objects. ratings/characteristics feature: flat models flat models, which allow simple attachment and wiring, have been added to the lineup. choose the model to suit the installation space from 3 sensing directions and 2 sizes, standard and small. ratings/characteristics *depends on the fiber diameter. feature: bundle fibers the fiber units contain a large number of independent fine fibers, ensuring a high degree of flexibility. ratings/characteristics standard models flexible (new standard) r fewer problems light intensity affected by bends in fiber fiber broken by getting caught on sur- rounding objects ? perform wiring without worrying about the bending radius. ? choose the model to suit the installation space from a variety of shapes. flexible fiber conventional fiber cladding cores min. sensing ob- ject 0.005-mm dia. min. bending ra- dius 1 mm ambient temper- ature range ? 40 c to 70 c (no icing or condensation) fiber material plastic standard equipped with sleeve cylindrical screw-shaped flat ? choose the model to suit the installation space from a variety of shapes. ? new flat models allow space savings and simple installation. min. sensing ob- ject 0.005-mm dia. min. bending ra- dius 10 or 25 mm* ambient temper- ature range ? 40 c to 70 c (no icing or condensation) fiber material plastic break-resistant b ? bundle- f iber models can be used f or moving parts. ? capable of withstanding at least one million re- peated bends (in typical applications). min. sensing ob- ject 0.005-mm dia. min. bending ra- dius 4 mm (withstands repeated bending) ambient temper- ature range ? 40 c to 70 c (no icing or condensation) fiber material plastic
7 ?2?eav?p?[v feature: fluorine coating fluororesin is used as the sheath material to prevent fi- ber degradation resulting from oil adhesion. note: the tip of the head is not chemical-resistant. ratings/characteristics this customization/delivery service applies to standard models. it is aimed at reducing industrial wast e and simplifying the installation procedure. fiber length vs. sensing distance through-beam fiber units (fiber length of 2 m corresponds to 100%.) fiber units with reflective sensors (fiber length of 2 m corresponds to 100%.) model number used when changing only the sleeve length model number used when changing the sleeve length and bends standard models fluorine coating u ? fiber degradation due to oil is prevented using a fluo- roresin coating. ? free cutting is possible with cutter provided. oil is blocked! (cross section) fluororesin coatin g min. sensing ob- ject 0.005-mm dia. min. bending ra- dius 4 mm ambient temper- ature range ? 40 c to 70 c (with no icing or condensation) fiber material plastic fiber customization service (fiber length, sleeve length, and bends) fiber length applicable models standard models flexible break-resistant models model number used for ordering standard model number + fiber length fiber length: 0.3 m, 0.5 m, or any length from 1 to 20 m (in 1-m units) sleeve length and bends applicable models e32-tc200b/e32-tc200f e32-dc200b/e32-dc200f the e32-dc200b cannot be bent. 100 80 60 40 20 2 0 5 10 15 20 fiber length (m) 100 80 60 40 20 2 0 5 10 15 20 fiber length (m) sensing distance (%) sensing distance (%) l model: e32- *1 c200 *2 -s*3 r l1 l2 r total length total length model numbers incorporating the bending radius, r, and dimensions l1 and l2 *1: insert "t" for through-beam fiber units and "d" for fiber units with reflective sensors. *2: insert the "b" or "f" that appears at the end of the original model number. *3: insert "50" if the total len g th is 50 mm. the total len g th must not exceed 120 mm. specifying l1 only r5 r7.5 r10 r12.5 model number l1 ( 1) 10 15 12.5 17.5 15 20 17.5 22.5 e32- *1 c200 *2 -s *3 a1 e32- *1 c200 *2 -s *3 a2 e32- *1 c200 *2 -s *3 b1 e32- *1 c200 *2 -s *3 b2 e32- *1 c200 *2 -s *3 c1 e32- *1 c200 *2 -s *3 c2 e32- *1 c200 *2 -s *3 d1 e32- *1 c200 *2 -s *3 d2 (units: mm) (units: mm) specifying l2 only r5 r7.5 r10 r12.5 bending radius bending radius l2 ( 1) 5 10 7.5 17.5 10 20 12.5 22.5 e32- *1 c200 *2 -s *3 a3 e32- *1 c200 *2 -s *3 a4 e32- *1 c200 *2 -s *3 b3 e32- *1 c200 *2 -s *3 b4 e32- *1 c200 *2 -s *3 c3 e32- *1 c200 *2 -s *3 c4 e32- *1 c200 *2 -s *3 d3 e32- *1 c200 *2 -s *3 d4 model number
8 features/applications overview of model variations note 1. the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). 2. these symbols are defined as follows. : flexible fiber, : bendable fiber, : fluorine-coated fiber. type (see note 2.) flexible (new standard) standard break-resistant fluorine coating shape of head [for dimensions, refer to page 40.] flexible and pliable withstands repeated bending cable protected against oil m4 530 e32-t11n screw-shaped (top-view) m4 530 760 680 680 e32-t11r e32-tc200 e32-t11 e32-t11u m3 130 220 200 e32-t21r e32-tc200e e32-t21 (with sleeve) m4 (1.2-dia. sleeve) 530 760 e32-tc200br e32-tc200b m3 (0.9-dia. sleeve) 130 220 e32-tc200fr e32-tc200f cylindrical (top-view) 3 dia. 530 760 680 e32-t12r e32-t12 e32-t12b 1.5 dia. 130 220 200 e32-t222r e32-t222 e32-t22b (side-view) 3 dia. 210 460 e32-t14lr e32-t14l 1 dia. 50 130 e32-t24r e32-t24 flat (top-view) 15 8 3 530 760 680 e32-t15xr e32-t15x e32-t15xb 12 7 2 130 220 150 e32-t25xr e32-t25x e32-t25xb (side-view) 15 8 3 210 460 e32-t15yr e32-t15y 12 7 2 50 130 e32-t25yr e32-t25y (flat-view) 15 8 3 210 460 e32-t15zr e32-t15z 12 7 2 50 130 e32-t25zr e32-t25z standard models sensing distance (mm) (see note 1.) model through-beam fiber units r b (cross section) fluororesin coatin g u r b u
9 ?2?eav?p?[v overview of model variations note 1. the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). 2. these symbols are defined as follows. : flexible fiber, : bendable fiber, : fluorine-coated fiber. type (see note 2.) flexible (new standard) standard break-resistant fluorine coating shape of head [for dimensions, refer to page 40.] flexible and pliable withstands repeated bending cable protected against oil m6 170 e32-d11n m6 170 e32-c11n m3 25 e32-c31n screw-shaped (top-view) m6 170 300 170 170 e32-d11r e32-dc200 e32-d11 e32-d11u m3 30 80 30 e32-d21r e32-dc200e e32-d21 (with sleeve) m6 (2.5-dia. sleeve) 170 300 e32-dc200br e32-dc200b m3 (1.2-dia. sleeve) 30 80 e32-dc200fr e32-dc200f cylindrical (top-view) 3 dia. 170 230 70 e32-d12r e32-d12 e32-d221b 3 dia. (1.5 dia.) 30 80 30 e32-d22r e32-d22 e32-d22b (side-view) 6 dia. 45 110 e32-d14lr e32-d14l 2 dia. 15 30 e32-d24r e32-d24 flat (top-view) 15 10 3 170 300 170 e32-d15xr e32-d15x e32-d15xb 12 7 2308050 e32-d25x e32-d25x e32-d25xb (side-view) 15 10 3 40 100 e32-d15yr e32-d15y 12 8 2820 e32-d25yr e32-d25y (flat-view) 15 10 3 40 100 e32-d15zr e32-d15z 12 8 2820 e32-d25zr e32-d25z standard models fiber units with reflective sensors r b (cross section) fluororesin coatin g u r b u sensing distance (mm) (see note 1) model
10 features/applications overview of model variations overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). applications ratings/characteristics type features shape, sensing distance (mm)* model number equipped with large lens 20,000 e32-t17l side-view, screw mounting 3,400 e32-t14 m4 screw 1,330 e32-t11l equipped with large lens 700 e32-d16 m6 screw 400 e32-d11l applications ratings/characteristics type features shape, sensing distance (mm)* model number 1-dia. cylinder 130 e32-t223r 0.5-dia. sleeve (0.25-dia. opening) 44 e32-t33-s5 0.22-dia. sleeve (0.1-dia. opening) 5 e32-t334-s5 0.8-dia. sleeve 16 e32-d33 0.5-dia. sleeve 3 e32-d331 special-beam models long distance, high power ? powerful beam reduces influence of dust and dirt. ? long sensing distance enables use in large-scale installations. e32-t14 e32-t11l e32-t17l detecting parts inside (trans- lucent) containers detecting workpieces in coating processes ambient tempera- ture range ? 40 c to 70 c (no icing or condensation) fiber material plastic through-beam refle- ctive ultracompact, ultrafine sleeve e32-t223r e32-t334-s5 e32-d33 1 dia. 0.5 dia. 0.22 dia. 3 dia. 3 dia. ? ultracompact head can be installed in tight spaces. ? ultrafine sleeve ensures reliable detection of small objects, such as electronic components. e32-d33 e32-t33-s5 alignment inspections detection of terminals min. sensing object 0.005-mm dia. ambient temperature range ? 40 c to 70 c (no icing or condensation) material plastic through-beam refle- ctive
11 ?2?eav?p?[v overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). applications ratings/characteristics type features shape, sensing distance (mm)* model number coaxial, m6 screw 300 e32-cc200 coaxial, 3-dia. cylinder 150 e32-d32l small spot 0.1-dia. spot at a distance of 7 mm e32-c41+ e39-f3a-5 small variable spot spot diameter variable in the range 0.1 to 0.6 mm at distances in the range 6 to 15 mm e32-c42+ e39-f3a long distance, small spot 0.5-dia. spot at 17 mm e32-c31+ e39-f3b long distance, parallel light spot diameter of 4 mm max. at distances in the range 0 to 20 mm e32-c31+ e39-f3c special-beam models coaxial, small spot ? small spot diameter (0.1 mm min. in diameter) enables the reliable detection of small workpieces. ? use of red light ensures easy visual recognition and simple positioning. e32-c42+ e39-f3a detecting of cds e32-c31+ e39-f3c min. sensing object 0.005-mm dia. ambient tempera- ture range ? 40 c to 70 c (no icing or condensation) fiber material plastic coaxial, reflective e32-c41+ e39-f3a-5 7 mm 0.1 mm dia. spot variable from 0.1 to 0.6 dia. e32-c42+ e39-f3a 6 mm 15 mm 17 mm 0.5 mm dia. e32-c31+ e39-f3b e32-c31+ e39-f3c 4 mm dia. 20 mm 11 mm
12 features/applications overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). applications ratings/characteristics type features shape, sensing distance (mm)* model number top view 1,900 e32-t22s side view 1,300 e32-t24s applications ratings/characteristics type features shape, sensing distance (mm)* model number sensing width: 11 mm 840 e32-t16pr sensing width: 11 mm flat-view 750 e32-t16jr sensing width: 30 mm 1,300 e32-t16wr beam width: 11 mm 150 e32-d36p1 special-beam models fine beam (narrow vision field) approx. 60 approx. 4 1300 mm ? fine beam reduces unwanted light in surrounding ar- ea. ? powerful beam allows use in applications requiring a long sensing distance. e32-t24s e32-t22s alignment inspection of orientation flats min. bending radius 10 mm ambient tempera- ture range ? 40 c to 70 c (no icing or condensation) fiber material plastic through-beam area sensing 30 mm 11 mm ? these fiber units ensure greater reliability with the detection of position inconsis tencies in passing work- pieces and the presence of workpieces with holes. ? wide sensing bands of 11 and 30 mm (through-beam models) enable the detecti on of large position incon- sistencies. e32-d36p1 e32-t16wr e32-t16wr e32-t16pr detecting passage of candies detecting chips on f ilm ambient tempera- ture range ? 40 c to 70 c (no icing or condensation) e32-t16w @ only: ? 25 c to 55 c fiber material plastic through-beam refle- ctive
13 ?2?eav?p?[v overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). applications ratings/characteristics type features shape, sensing distance (mm)* model number msr function, m6 screw 250 e32-r21 msr function, screw mounting, long distance 1,500 e32-r16 applications ratings/characteristics type features shape, sensing distance (mm)* model number ultracompact, flat-view ideal for checking stocks of glass sub- strates 0 to 4 E32-L24S heat-resistant up to 105 c, top-view 5.4 to 9 (center: 7.2) e32-l25l wide sensing range, flat-view 0 to 15 e32-a10 heat-resistant up to 200 c, flat-view 4 to 10 e32-l86 special-beam models retroreflective ? the return optical path ensures that more light is interrupted by transparent workpieces than with through-beam models. ? equipped with msr function to eliminate light reflected directly from the workpiece. e32-r16 e32-r21 detecting translucent medicine ambient temperature range e32-r21: ? 40 c to 70 c e32-r16: ? 25 c to 55 c (with no icing or condensation) fiber material plastic retrore- flective limited-reflective detection range non-detection range ? limited-reflective models eliminate light reflected from distant objects. ? small level differences can be reliably detected. ? the optical-axis direction can be selected according to the installation space. e32-l24l e32-l25l e32-l24l detecting connector pins detecting wafers (glass substrates) min. sensing object 0.005-mm dia. fiber material plastic 200 c models only: glass limited-reflective
14 features/applications overview of model variations *1 the sensing distances apply fo r use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). *2 order the fiber unit based on the amplifier unit. use the e32-d @ -s if the e3x-da @ -s, e3x-mda @ , or e3x-dac @ -s is used. use the e32-d @ if any other amplifier is used. overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). applications ratings/characteristics type ambient tem- perature range features shape, sensing distance (mm) *1 model number ? 40 c to 150 c m4 screw 760 e32-t51 ? 40 c to 200 c l-shaped, long distance 1,300 e32-t84s-s ? 60 c to 350 c m4 screw 450 e32-t61-s ? 60 c to 350 c m6 screw 90 e32-d61-s ? 40 c to 400 c m6 screw, with sleeve 60 e32-d73-s applications ratings/characteristics type features shape, sensing distance (mm)* model number water-resistant rou nd head 2,000 e32-t11f built-in lens, high power 3,000 e32-t12f heat-resistant up to 200 c 700 e32-t81f-s built-in lens, high power 95 e32-d12f environment-resistant models heat-resistant ? these fiber units can be used for various applica- tions in temperatures up to 400 c. e32-t84s-s e32-t61-s detecting wafers in high-temperature en- vironments 150 c models 200 c and higher models e32-t81r e32-d81r all other models min. bending radius 35 mm 10 mm 25 mm fiber material plastic (fluororesin coating) glass (fluo- roresin coating) glass (sus spi- ral coating) t hrough-beam refle- cti v e *2 chemical-resistant ? built-in lens and high-pow er beam reduce the influ- ence of dirt and drops of water. ? round design prevents drops of water sticking to the head (e32-t11f). e32-t14f detecting workpieces in cleaning processes e32-t12f all other models e32-t51f e32-t81f-s ambient tem- perature range ? 40 c to 70 c ? 40 c to 150 c ? 40 c to 200 c fiber material plastic (fluororesin coating) glass (fluororesin coating) through-beam refle- cti v e *2
15 ?2?eav?p?[v overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). fiber units on atmospheric-pressure side flanges ratings/characteristics applications (configuration example) ratings/characteristics type features shape, sensing distance (mm)* model number m4 screw, top-view, heat-resistant up to 120 c, long distance 1,000 e32-t51v+ e39-f1v l-shaped, heat-resistant up to 120 c 130 e32-t54v 1m l-shaped, long distance, heat-resis- tant up to 200 c 480 e32-t84sv 1m appearance type model number common e32-t10v 2m appearance type model number 4-channel flange e32-vf4 1-channel flange e32-vf1 number of channels 4 channels 1 channels item model e32-vf4 e32-vf1 leakage rate 1 10 -10 pam 3 /s max. ambient temperature range operating: ? 25 c to 55 c storage: ? 25 c to 55 c material aluminum (a5056) stainless steel (sus304) aluminum (a5056) flange-seal material fluorocarbon ru bber (viton) weight (packed state) approx. 280 g approx. 240 g environment-resistant models vacuum-resistant ? these models can be used in high-vacuum environ- ments at pressures from 10 -5 to 0.1 pa. ? the 4-channel multi-flange, which has a maximum leakage rate of 1 10 -10 pam 3 /s, contributes to space savings. fiber unit on vacuum side (set of 2) e32-t51v e32-t54v e32-t84sv flange e32-vf4 (4 ch ) e32-vf1 (1 ch ) lens unit e39-f1v vacuum chamber atmospheric-pressure side fiber units on atmospheric- pressure side (set of 2) e32-t10v amplifier unit e3x-da-s e3x-na vacuum side 120 c models 200 c models atmospheric- pressure side min. bend- ing radius 30 mm 25 mm fiber mate- rial glass (fluorores- in coating) glass (sus spiral coating) plastic through-beam
16 features/application overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). applications ratings/characteristics type features shape, sensing distance (mm)* model number slot sensor, no adjustment of optical axis required 10 e32-g14 screw mounting, side-view 3,400 e32-t14 operating principle the presence/absence of liquid is detected using the refractive properties of light . more specifically, it utilizes the fact that the difference in refractive index between the air and the tip/tube is la rger than the difference be- tween the liquid and the tip/tube. type features shape, sensing distance (mm)* model number light on when liquid is present (ideal for checking lower limits) applicable tube: transparent tube with a diameter of 3.2, 6.4, or 9.5 mm and a rec- ommended wall thickness of 1 mm e32-a01 light on when liquid is absent (ideal for checking for overflow) applicable tube: transparent tube with a diameter in the range 6 to 13 mm and a recommended wall thickness of 1 mm e32-a02 no restriction on tube diameter, resis- tant to bubbles and drops of water applicable tube: transparent tube (no re- striction on diameter) e32-d36t heat-resistant up to 200 c, shape pre- vents liquid buildup liquid-contact model e32-d82f1 application-corresponding models label detection 10 mm ? built-in lens and high-power beam enable the reliable detec - tion of labels through a mounting board. ? these fiber units can be washed with hydrogen peroxide, making them ideal for the food industry. e32-g14 e32-g14 detecting labels ambient tempera- ture range ? 40 c to 70 c (no icing or condensation) fiber material plastic degree of protec- tion ip67 through-beam liquid-level detection ? area sensing is possible with minimal influence from bubbles and drops of water (e32-a01/a02/d36t). ? for safety when disconnections occur, two models have been developed, a light on model for liquid pres- ence and a light on model for liquid absence (e32-a01/ a02). e32-d36t e32-d82f1 tube-mounting model liquid-contact model air liquid no liquid present liquid present air tube liquid liquid-contact model tube-mounting tube-mounting liquid- c ontact
17 ?2?eav?p?[v overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). overview of model variations *the sensing distances apply for use in combination with the e3x-da-s amplifier unit (general-purpose, standard mode). engineering data (e32-a07/a08/l16-n) type features shape, sensing distance (mm)* model number 0 to 15 mm, wide-range sensing 0 to 15 e32-l16-n long-distance sensing 10 to 20 e32-a08 15 to 25 e32-a07e1 e32-a07e2 heat-resistant up to 300 c 5 to 18 e32-l66 engineering data (e32-a09) type features shape, sensing distance (mm)* model number large-diameter lens ensures re- sistance to tilting 15 to 38 (center: 25) e32-a09 heat-resistant up to 150 c e32-a09h heat-resistant up to 300 c 20 to 30 (center: 25) e32-a09h2 application-corresponding models glass-substrate alignment ? there is little variation of detection position within the detection range ( 0.1 mm max.) ? the different model variations can handle a variety of sensing distances and te mperature conditions. e32-l16-n detection-position characteristic (typical examples) sensing distance, y (mm) sensing o b ject: ra w glass (t = 0.7 mm, ro u nded edge) 2.5 0 5 10 15 20 25 3.0 3.5 4.5 5.0 6.0 e32-a07 e32-a0 8 e32-l16- n y x limited-reflective glass-substrate mapping ? these models can reliably detect thin glass-substrate end faces (t = 0.5 mm, beveled edge). ? using a large-diameter lens makes it possible to cope with tilting of the glass substrates. e32-a09 x mm angle characteristics in left and right directions (typical example) rate of change of digital light-intensity value (%) angle, (o) sensing object: raw glass (t = 0.5 mm, beveled/rounded edge) sensing object: raw glass (t = 0.5 mm, rounded edge) ? + 25 mm ? 10 ? 8 ? 6 ? 4 ? 20 2 4 6 8 10 0 100 75 25 50 emission side reception side sensing distance, x (mm) 300 250 200 150 100 50 0 0 10203040506070 digital light-intensity value vs sensing distance (typical examples) digital light-intensity value rounded edge beveled edge limited-reflective
18 features/applications overview of model variations *the sensing distances apply for use in co mbination with the e3x-da-s amplifier unit (general-purpose, standard mode). features engineering data type features shape, sensing distance (mm)* model number opening angle: 1.5 890 e32-a03 with mounting flange e32-a03-1 opening angle: 3 ultraslim 340 e32-a04 with mounting flange e32-a04-1 application-corresponding models wafer mapping ? wafers are reliable detect ed with an ultrafine beam. ? the optical axis is adjusted before delivery to allow easy installation. e32-a03 e32-a03-1 direction of rotation vertical rotation optical axis adjusted before delivery so that displacement is typically within 0.1 . 8-inch wafer mapping characteristic (typical examples) rate of change of digital light-intensity value (%) distance moved , x ( mm ) ? 10 ? 9 ? 8 ? 7 ? 6 ? 5 ? 4 ? 3 ? 2 ? 101234 180 140 160 120 100 80 60 40 20 0 wafer piles can also be detected 170 mm fiber fiber 6.35 mm 2-wafer pile silicon wafer (t = 0.75 mm) for 2 wafers for 1 wafer x through-beam
19 ordering information *1. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. indicates models that allow free cutting. type appearance (mm) *2 dimen- sions page sensing distance (mm) standard object (min. sensing object) (mm) *1 min. bend- ing radius (mm) features model number 40 1 dia. (0.005 dia.) r1 m4 right angle e32-t11n 40 m4 screw e32-t11r 40 3-dia. cylinder e32-t12r 40 flat shape e32-t15xr 40 m4 screw, with sleeve e32-tc200br e32-tc200b4r 40 3-dia. cylinder, side-view e32-t14lr 41 flat shape, side-view e32-t15yr 41 flat shape, flat-view e32-t15zr 40 0.5 dia. (0.005 dia.) m3 screw (small) e32-t21r 40 2-dia. cylinder (small) e32-t22r 40 1.5-dia. cylin- der (small) e32-t222r 40 flat shape (small) e32-t25xr 40 m3 screw (small), with sleeve e32-tc200fr e32-tc200f4r 41 1-dia. cylinder (small), side-view e32-t24r 41 flat shape (small), side-view e32-t25yr 41 flat shape (small), flat-view e32-t25zr through-beam fiber units standard models high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( flexible (new standard) standard size m4 350 (140) 530 700 r m4 3 dia. 15 8 3 1.2 dia. m4 min. b ending radi u s of slee v e: 5 ( ): e32-tc200b4r 90 (40) 3 dia. 130 (50) 210 270 15 8 3 15 8 3 small size m3 130 160 75 (30) 2 dia. 1.5 dia. 12 7 2 m3 0.9 dia. 90 (40) ( ): e32-tc200f4r min. b ending radi u s of slee v e: 5 1 dia. 60 50 25 (10) 12 7 2 12 7 2 flexi b le break-resistant fl u ororesin coating
20 *1. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. indicates models that allow free cutting. type appearance (mm) *2 dimen- sions page sensing distance (mm) standard object (min. sensing object) (mm) *1 min. bend- ing radius (mm) features model number 40 1 dia. (0.005 dia.) r25 m4 screw e32-tc200 40 3-dia. cylinder e32-t12 40 flat shape e32-t15x 40 m4 screw, with sleeve e32-tc200b e32-tc200b4 40 3-dia. cylinder, side-view e32-t14l 41 flat shape, side-view e32-t15y 41 flat shape, flat-view e32-t15z 40 m3 screw (small) e32-tc200a 40 0.5 dia. (0.005 dia.) r10 e32-tc200e 40 2-dia. cylinder (small) e32-t22 40 1.5-dia. cylin- der (small) e32-t222 40 flat shape (small) e32-t25x 40 m3 screw (small), with sleeve e32-tc200f e32-tc200f4 41 1-dia. cylinder (small), side- view e32-t24 41 flat shape (small), side- view e32-t25y 41 flat shape (small), flat-view e32-t25z through-beam fiber units standard models high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( s tandard standard size m4 760 1,000 500 (200) m4 15 8 3 1.2 dia. m4 min. b ending radi u s of slee v e: 5 ( ): e32-tc200b4r 90 (40) 3 dia. 300 (120) 460 600 15 8 3 15 8 3 small size m3 680 900 450 (180) m3 125 (50) 220 270 2 dia. 1.5 dia. 12 7 2 m3 0.9 dia. 90 (40) ( ): e32-tc200f4r min. b ending radi u s of slee v e: 5 1 dia. 130 160 75 (30) 12 7 2 12 7 2 flexi b le break-resistant fl u ororesin coating
21 *1. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. indicates models that allow free cutting. type appearance (mm) *2 dimen- sions page sensing distance (mm) standard object (min. sensing object) (mm) *1 min. bending radius (mm) features model number 42 1 dia (0.005 dia.) r4 m4 screw e32-t11 42 3-dia. cylinder e32-t12b 42 flat shape e32-t15xb 42 0.5 dia (0.005 dia.) m3 screw (small) e32-t21 42 2-dia. cylinder (small) e32-t221b 42 1.5-dia. cylin- der (small) e32-t22b 42 flat shape (small) e32-t25xb 42 1 dia. (0.005 dia.) r4 m4 screw, fluorine coat- ing e32-t11u standard models high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( break-resistant standard size m4 680 900 450 (180) b 3 dia. 15 8 3 small size m3 110 (45) 200 240 2 dia. 1.5 dia. 12 7 2 180 150 85 (35) coating m4 680 900 450 (180) u flexi b le break-resistant fl u ororesin coating
22 *1. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. indicates models that allow free cutting. *3. the optical fiber is 10 m long on each si de, so the sensing distance is 20,000 mm. *4. the optical fiber is 2 m long on each si de, so the sensing distance is 4,000 mm. type appearance (mm) *2 dimen- sions page sensing distance (mm) standard object (min. sensing object) (mm) *1 min. bending radius (mm) features model num- ber 43 10 dia. r25 large built-in lens, m14 screw e32-t17l 40 60 4 dia. (0.1 dia.) r1 m4 right angle e32-t11n+ e39-f1 40 60 r25 m4 screw e32-tc200+ e39-f1 40 60 r1 m4 screw, flexible fiber e32-t11r+ e39-f1 42 60 r4 m4 screw, break-resistant e32-t11+ e39-f1 43 r25 screw mount- ing, side-view e32-t14 43 1.4 dia. (0.01 dia.) m4 screw e32-t11l 43 3-dia. cylinder e32-t12l 43 60 3 dia. (0.1 dia.) r25 m4 screw, side-view e32-t11l+ e39-f2 40 60 r1 m4 screw, side-view, flex- ible fiber e32-t11r+ e39-f2 42 60 r4 m4 screw, side-view, break-resistant e32-t11+ e39-f2 43 0.9 dia. (0.005 dia.) r10 m3 screw (small) e32-t21l 43 2-dia. cylinder (small) e32-t22l through-beam fiber units special-beam models high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( long-distance, high-power m14 20,000*3 20,000*3 10,000 (4,000) m4 4,000 3,700 2,400 (970) r m4 4,000*4 4,000*4 2,600 (1,500) 4,000*4 3,700 2,400 (970) r 4,000*4 3,600 2,300 (930) b 4,000*4 3,400 2,250 (900) m4 1,700 1,330 870 (350) 3 dia. m 4 500 (180) 910 800 520 400 250 (100) r 430 (160) 660 820 b m3 540 440 250 (100) 2 dia. flexi b le break-resistant fl u ororesin coating
23 *1. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. indicates models that allow free cutting. *3. this is the value for which detection is possible within the sensing area, with the sensing distance set to 300 mm. (the sen sing object is stationary.) *4. this is the value for which detection is possible within the sensing area, with the sensing dist ance set to give a digital v alue of 1,000. (the sensing object is sta- tionary.) type appearance (mm) *2 dimen- sions page sensing distance (mm) standard object (min. sensing object) (mm)*1 min. bend- ing radius (mm) features model number 44 0.5 dia. (0.005 dia.) r1 1-dia. cylinder, flexible fiber e32-t223r 44 0.25 dia. (0.005 dia.) r10 0.5-dia. sleeve; 0.25- dia. opening e32-t33-s5 44 0.125 dia. (0.005 dia.) 0.25-dia. sleeve, 0.125- dia. opening e32-t333-s5 44 0.1 dia. (0.005 dia.) 0.22-dia. sleeve, 0.1- dia. opening e32-t334-s5 44 1.7 dia. (0.1 dia.) r10 3-dia. cylinder e32-t22s 44 2 dia. (0.1 dia.) 3.5-dia. cylin- der, side-view e32-t24s 45 (0.2 dia.) *3 r1 area width: 11 mm e32-t16pr 45 r10 e32-t16p 45 r1 area width: 11 mm; side- view e32-t16jr 45 r10 e32-t16j 44 (0.3 dia.) *3 r1 area width: 30 mm e32-t16wr 44 r10 e32-t16w 45 (0.6 dia.) *4 r25 area width: 10 mm; long distance e32-t16 44 2 dia. (0.1 dia) multi-point de- tection (4- head) e32-m21 special-beam models high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( ultracompact, thin-sleeve 1 dia. 130 160 75 (30) r sleeve cannot be bent. 3 dia. 0.5 dia. 53 44 25 (10) sleeve cannot be bent. 3 dia. 0.25 dia. 12 10 6 (4) sleeve cannot be bent. 3 dia. 0.22 dia. 6 5 3 (2) fine-beam 3 dia. 2,500 1,900 1,250 (500) 3.5 dia. 1,750 1,300 870 (350) area-sensing 11 1,100 840 560 (220) r 1,500 1,100 750 (300) 11 980 750 480 (190) r 1,300 1,000 650 (260) 30 1,700 1,300 850 (340) r 2,300 1,800 1,150 (450) 10 3,700 2,800 1,850 (740) m3 750 610 350 (140)
24 *1. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. indicates models that allow free cutting. *3. this is the value for which detection is possible within the sensing area, with the sensing distance set to 300 mm. (the sen sing object is stationary.) *4. this is the value for which detection is possible within the sensing area, with the sensing dist ance set to give a digital v alue of 1,000. (the sensing object is sta- tionary.) *5. for continuous operation, use the products within a temperature range of ? 40 c to 130 c. *6. the maximum temperature that can be withstood varies wit h the location. refer to dimensions diagrams for details. *7. the optical fiber is 2 m long on each si de, so the sensing distance is 4,000 mm. through-beam fiber units environment-resistant models high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( type appearance (mm) *2 dimen- sions page sensing distance (mm) standard object (min. sensing object) (mm)*1 min. bending radius (mm) features model number 150 c *5 46 1.5 dia. (0.1 dia.) r35 heat-resis- tant up to 150 c e32-t51 46 heat-resis- tant up to 150 c; side- view e32-t54 200 c *6 46 1 dia. (0.005 dia.) r10 heat-resis- tant up to 200 c e32-t81r-s 46 60 3 dia. (0.1 dia.) r25 heat-resis- tant up to 200 c; side- view e32-t61-s+ e39-f2 46 60 4 dia. (0.1 dia.) heat-resis- tant up to 200 c, long distance e32-t61-s+ e39-f1 46 1.7 dia. (0.1 dia) heat-resis- tant up to 200 c; l- shaped; long distance e32-t84s-s 350 c *6 46 1 dia. (0.005 dia.) heat-resis- tant up to 350 c e32-t61-s 46 4 dia. (0.1 dia.) r4 fluororesin cover, round head e32-t11f 46 r40 fluororesin cover, long distance e32-t12f 46 3 dia. (0.1 dia.) fluororesin cover, side- view e32-t14f 46 4 dia. (0.1 dia.) fluororesin cover, heat- resistant up to 150 c *5 e32-t51f 46 1 dia. (0.005 dia.) r10 fluororesin cover, heat- resistant up to 200 c *6 e32-t81f-s heat-resistant m4 1,000 760 500 (200) 2 dia. 300 230 150 (60) m4 360 280 180 (70) m 4 600 450 300 (120) m4 4,000*7 3,400 2,200 (900) 3 dia. 1,750 1,300 870 (350) m4 600 450 300 (120) chemical-resistant 7.2 dia. 2,500 2,000 1,300 (520) 5 dia. 4,000*7 3,000 2,000 (800) 5 dia. 500 400 250 (100) 5 dia. 1,800 1,400 900 (350) 6 dia. 920 700 460 (190)
25 * the values for the minimum sensing object are representative va lues that indicate values obtained in standard mode with the se nsing distance and sensitivity set to optimum values. flanges fiber units for atmosp heric-pressure side * indicates models that allow free cutting. lens units mounting brackets type appearance (mm) dimen- sions page sensing distance (mm) standard object (min. sensing ob- ject) (mm) * min. bending radius (mm) features model number 47 1.2 dia. (0.01 dia.) r30 m4 screw, heat-resistant up to 120 c e32-t51v 1m 47 47 4 dia. (0.1 dia.) m4 screw, heat-resistant up to 120 c, long distance e32-t51v 1m+ e39-f1v 47 1.2 dia. (0.01 dia.) l-shaped, heat-resistant up to 120 c e32-t54v 1m 47 47 4 dia. (0.1 dia.) l-shaped, heat-resistant up to 120 c, long distance e32-t54v 1m+ e39-f1v 47 2 dia. (0.1 dia.) r25 l-shaped, heat-resistant up to 200 c, long distance e32-t84sv 1m environment-resistant models high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( vacuum-resistant 260 200 130 (50) 1,350 1,000 680 (260) 130 210 100 (35) 500 660 330 (180) 480 630 320 (130) appearance (mm) dimensions page type model number 47 4-channel flange e32-vf4 47 1-channel flange e32-vf1 appearance (mm) dimen- sions page type model number 47 amplifier-flange connection fiber e32-t10v 2m appear- ance (mm) dimen- sions page type quan- tity remarks 47 e39-f1v 2 long-distance lens unit can be used for the e32-t51v and the e32-t54v. appear- ance (mm) dimen- sions page type quan- tity remarks 47 e39-l54v 2 can be used for the e32-t54v.
26 *1. the sensing distances are for white paper. *2. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *3. indicates models that allow free cutting. type appearance (mm) *3 dimen- sions page sensing distance (mm) *1 (min. sensing object) (mm) *2 min. bending radius (mm) features model number 48 (0.005 dia.) r1 m6 right an- gle e32-d11n 48 m6 screw e32-d11r 48 3-dia. cylin- der e32-d12r 48 flat shape e32-d15xr 48 m6 screw, with sleeve e32-dc200br e32-dc200b4r 49 6-dia. cylin- der, side- view e32-d14lr 49 flat shape, side-view e32-d15yr 49 flat shape, flat-view e32-d15zr 48 m4 screw (small) e32-d211r 48 m3 screw (small) e32-d21r 48 3-dia. cylin- der (small) e32-d22r 48 flat panel (small) e32-d25xr 48 m3 screw (small), with sleeve e32-dc200fr e32-dc200f4r 49 2-dia. cylin- der (small), side-view e32-d24r 49 flat shape (small), side-view e32-d25yr 49 flat shape (small), flat-view e32-d25zr fiber units with reflective sensors standard models high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( flexible (new standard) standard size m6 300 170 120 (50) r m6 3 dia. 15 10 3 2.5 dia. m6 sleeve can- not be bent. 6 dia. 80 45 30 (14) 15 10 3 70 40 26 (12) 15 10 3 small size m4 50 30 20 (8) m3 3 dia. 12 8 3 1.2 dia. m3 min. bending radius of sleeve: 5 2 dia. 26 15 10 (4) 12 8 2 14 8 5 (2) 12 8 2 flexi b le break-resistant fl u ororesin coating
27 *1. the sensing distances are for white paper. *2. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *3. indicates models that allow free cutting. type appearance (mm) *3 dimen- sions page sensing distance (mm) *1 (min. sens- ing object) (mm) *2 min. bending radius (mm) features model number 48 (0.005 dia.) r25 m6 screw e32-dc200 48 3-dia. cylinder e32-d12 48 flat shape e32-d15x 48 m6 screw, with sleeve e32-dc200b e32-dc200b4 49 6-dia. cylinder, side-view e32-d14l 49 flat shape, side-view e32-d15y 49 flat shape, flat-view e32-d15z 48 r10 m4 screw (small) e32-d211 48 m3 screw (small) e32-dc200e 48 3-dia. cylinder (small) e32-d22 48 flat shape (small) e32-d25x 48 m3 screw (small), with sleeve e32-dc200f e32-dc200f4 49 2-dia. cylinder (small), side-view e32-d24 49 flat shape (small), side-view e32-d25y 49 flat shape (small), flat-view e32-d25z standard models high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( s tandard standard size m6 500 300 200 (90) 3 dia. 400 230 160 (70) 15 10 3 500 300 200 (90) 2.5 dia. m6 90 (40) ( ): e32-dc200b4 sleeve cannot be bent. 6 dia. 200 110 80 (36) 15 10 3 100 170 65 (30) 15 10 3 small size m4 130 80 50 (22) m3 3 dia. 12 8 2 1.2 dia. m3 90 (40) ( ): e32-dc200f4 min. bending ra- dius of sleeve: 5 2 dia. 50 30 20 (8) 12 8 2 35 20 12 (6) 12 8 2 flexi b le break-resistant fl u ororesin coating
28 *1. the sensing distances are for white paper. *2. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *3. indicates models that allow free cutting. type appearance (mm) *3 dimen- sions page sensing distance (mm) *1 (min. sensing object) (mm) *2 min. bending radius (mm) features model number 50 (0.005 dia.) r4 m6 screw e32-d11 50 flat shape e32-d15xb 50 m4 screw (small) e32-d21b 50 3-dia. cylinder (small) e32-d221b 50 m3 screw (small) e32-d21 50 1.5-dia. cylinder (small) e32-d22b 50 flat shape (small) e32-d25xb 50 (0.005 dia.) r4 m6 screw, fluorine coating e32-d11u fiber units with reflective sensors standard models high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( break-resistant standard size m6 300 170 120 (50) b 15 10 3 small size m4 110 70 45 (20) 3 dia. m3 50 30 20 (8) 1.5 dia. 12 8 2 50 85 30 (15) coating m6 300 170 120 (50) u flexi b le break-resistant fl u ororesin coating
29 *1. the sensing distances are for white paper. *2. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *3. indicates models that allow free cutting. type appearance (mm) *3 dimen- sions page sensing distance (mm) *1 (min. sensing object) (mm) *2 min. bending radius (mm) features model num- ber 51 --- r4 large built-in lens, screw mounting e32-d16 51 (0.005 dia.) r25 m6 screw e32-d11l 51 r10 m4 screw e32-d21l 51 3-dia. cylinder e32-d22l 51 r4 0.8-dia. sleeve e32-d33 51 0.5-dia. sleeve e32-d331 special-beam models high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( long-distance, high-power 17.5 40 to 700 40 to 1,000 40 to 450 (40 to 240) b m6 650 400 260 (110) m4 210 130 80 (35) 3 dia. ultracompact, thin-sleeve sleeve cannot be bent. 3 dia. 0.8 dia. 25 16 10 (4) sleeve cannot be bent. 2 dia. 0.5 dia. 5 3 2 (0.8)
30 *1. the sensing distances are for white paper. *2. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *3. indicates models that allow free cutting. type appearance (mm) *3 dimen- sions page sensing distance (mm) *1 (min. sens- ing object) (mm) *2 min. bending radius (mm) features model number 52 (0.005 dia.) r4 m6 right angle e32-c11n 52 m3 right angle e32-c31n 52 m6 screw e32-cc200r 52 r25 e32-cc200 52 3-dia. cylinder e32-d32l 52 m3 screw (small) e32-c31 52 2-dia. cylinder (small) e32-d32 52 60 6 to 15 mm; spot diameter: 0.1 to 0.6 mm small spot (variable) e32-c42+ e39-f3a 52 60 spot diameter of 0.5 to 1 mm at distances in the range 6 to 15 mm e32-d32+ e39-f3a 52 60 spot diameter of 0.1 mm at 7 mm small spot e32-c41+ e39-f3a-5 52 60 spot diameter of 0.5 mm at 7 mm e32-c31+ e39-f3a-5 52 60 spot diameter of 0.2 mm at 17 mm long distance, small spot e32-c41+ e39-f3b 52 60 spot diameter of 0.5 mm at 17 mm e32-c31+ e39-f3b 52 60 spot diameter of 4 mm max. at distanc- es in the range 0 to 20 mm long-dis- tance sensing, parallel light e32-c31+ e39-f3c 53 (0.005 dia.) r4 beam width: 11 mm e32-d36p1 53 (0.1 dia.) r10 m6 screw e32-r21+ e39-r3 (attached) 53 (0.2 dia.) r25 screw mount- ing, long dis- tance e32-r16+ e39-r1 (attached) fiber units with reflective sensors special-beam models high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( coaxial, small-spot m6 2 8 0 170 160 (50) r m3 40 25 23 (7) m6 250 150 100 (45) 500 300 200 (90) 3 dia. 250 150 100 (45) m3 120 75 50 (22) 2 dia. 4-dia. spot area-sensing 250 150 100 (45) b retroreflective e39-r3 reflector m6 10 to 250 10 to 250 10 to 250 (10 to 250) e39-r3 reflecto r 150 to 1,500 150 to 1,500 150 to 1,500 (150 to 1,500) flexi b le break-resistant fl u ororesin coating
31 *1. the sensing distances are for white paper. *2. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *3. indicates models that allow free cutting. *4. for continuous operation, use the products within a temperature range of ? 40 c to 90 c. type appearance (mm) *3 dimen- sions page sensing distance (mm) *1 (min. sensing object) (mm) *2 min. bending radius (mm) features model number 54 (0.005 dia.) r25 small level dif- ferences, high power, side-view e32-l25 54 small level dif- ferences, top- view e32-l25a 54 r10 ultracompact, flat-view E32-L24S 54 heat resistant up to 105 c *4, top-view e32-l24l 54 heat resistant up to 105 c *4, top-view e32-l25l 55 r25 heat resistant up to 200 c, flat- view e32-l86 55 soda glass with reflection factor of 7% heat resistant up to 300 c e32-l64 55 ideal for detect- ing glass stock. e32-a10 special-beam models high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( convergent-reflective 3.3 3.3 3.3 (3.3) 0 to 4 0 to 4 0 to 4 (0 to 4) 2 to 6 (center: 4) 2 to 6 (center: 4) 2 to 6 (2 to 6) (center: 4) 5.4 to 9 (center: 7.2) 5.4 to 9 (center: 7.2) 5.4 to 9 (5.4 to 9) (center: 7.2) 4 to 10 4 to 10 4 to 10 (4 to 10) 1 to 5 1 to 5 1 to 5 0 to 8 0 to 8 0 to 6 0 to 4
32 *1. the sensing distances are for white paper. *2. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *3. indicates models that allow free cutting. *4. for continuous operation, use the products within a temperature range of ? 40 c to 90 c. *5. the maximum temperature that can be withstood varies wit h the location. refer to dimensions diagrams for details. *6. order the fiber unit based on the amplifier unit. use the e32-d @ -s if the e3x-da @ -s, e3x-mda @ , or e3x-dac @ -s is used. use the e32-d @ if any other amplifier is used. type appearance (mm) *3 dimen- sions page sensing distance (mm) *1 (min. sensing object) (mm) *2 min. bending radius (mm) features model num- ber 150 c *4 56 (0.005 dia.) r35 heat resistant up to 150 c e32-d51 200 c *5 56 r10 heat resistant up to 200 c e32-d81r-s e32-d81r*6 350 c *5 56 r25 heat resistant up to 350 c e32-d61-s e32-d61*6 400 c *5 56 heat resistant up to 400 c, with sleeve e32-d73-s e32-d73*6 56 (0.005 dia.) r40 fluororesin cover, long distance e32-d12f 56 fluororesin cover, side- view e32-d14f fiber units with reflective sensors environment-resistant models high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( heat-resistan t m6 400 230 160 (72) m6 150 90 60 (27) m6 m4 1.25 dia. min. bending radius of sleeve: 10 100 60 40 (18) chemical-resistant 6 dia. 160 95 65 (30) 7 dia. 70 40 30 (10) flexi b le break-resistant fl u ororesin coating
33 ordering information *1. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. indicates models that allow free cutting. *3. the maximum temperature that can be withstood varies wit h the location. refer to dimensions diagrams for details. *4. these values are based on the assumption that t here are no repeated sudden changes in temperature. *5. the characteristics for sensing object incline are different between the attachments with model numbers ending in "e1" and " e2." refer to page 52 for installation precautions. type appearance (mm) *2 dimen- sions page sensing distance (mm) standard object (min. sensing object) (mm)*1 min. bend- ing radius (mm) features model num- ber 57 4 dia. (0.1 dia.) r25 slot sensor (no adjustment of op- tical axis required) e32-g14 43 screw mounting, side-view e32-t14 57 applicable tube: transparent tube with a diameter in the range 8 to 10 mm and a recommended wall thickness of 1 mm r10 compact e32-l25t 57 applicable tube: transparent tube (no restriction on diameter) r4 no restriction on tube diameter, re- sistant to bubbles and drops of water e32-d36t 58 applicable tube: transparent tube with a diameter of 3.2, 6.4, or 9.5 mm and a recommended wall thickness of 1 mm light on when fluid is present, resistant to bubbles and drops of water e32-a01 58 applicable tube: transparent tube with a diameter in the range 6 to 13 mm and a recommended wall thickness of 1 mm light on when fluid is not present, re- sistant to bubbles and drops of water e32-a02 58 liquid-contact models r40 heat resistant up to 200 c, fluororesin cover e32-d82f1 e32-d82f2 54 soda glass with reflection factor of 7% r25 variation of detec- tion position within the detection range: 0.1 mm e32-l16-n 58 e32-a08 58 e32-a07e1 *5 e32-a07e2 *5 58 heat resistant up to 300 c *3, *4 e32-l66 54 heat resistant up to 300 c e32-a08h2 application-corresponding fiber units high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( label-detection 10 10 10 (10) 4,500 3,400 2,250 (900) liquid-level detection glass-substrate-alignment 0 to 15 0 to 15 0 to 15 (0 to 12) 10 to 20 10 to 20 10 to 20 ( - ) 15 to 25 15 to 25 10 to 20 ( - ) 5 to 18 5 to 18 5 to 16 ( - ) 10 to 20 10 to 20 10 to 20
34 *1. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. indicates models that allow free cutting. *3. for continuous operation, use the products within a temperature range of ? 40 c to 130 c. *4. the maximum temperature that can be withstood varies wit h the location. refer to dimensions diagrams for details. *5. these values are based on the assumption that t here are no repeated sudden changes in temperature. type appearance (mm) *2 dimen- sions page sensing distance (mm) standard object (min. sensing object) (mm)*1 min. bending radius (mm) features model number 59 edge of soda glass with re- flection factor of 7% (t = 0.5 mm, rounded edge) r25 resistant to tilting e32-a09 59 r35 heat resistant up to 150 c *3 e32-a09h 59 r25 heat resistant up to 300 c *4, *5 e32-a09h2 59 2 dia. (0.1 dia.) r1 opening angle: 1.5 ; optical axis adjusted before delivery e32-a03 59 r10 opening angle: 1.5 ; with mounting flange; optical axis adjusted before de- livery e32-a03-1 44 long distance; opening angle: 4 e32-t24s 59 1.2 dia. (0.1 dia.) ultraslim (t = 2 mm); opening angle: 3 ; optical axis adjusted before delivery e32-a04 59 ultraslim (t = 2 mm); opening angle: 3 ; with mounting flange; optical axis adjusted before de- livery e32-a04-1 application-corresponding fiber units high-resolution mode high-speed mode *when used in combination with the e3x-da-s amplifier unit (general-purpose). standard mode super-high-speed mode) ( glass-substrate-mapping 15 to 38 (center: 25) 15 to 38 (center: 25) 15 to 38 (center: 25) ( - ) 20 to 30 (center: 25) 20 to 30 (center: 25) 20 to 30 (center: 25) ( - ) wafer-mapping 3 dia. 1,150 890 600 (250) r 3 dia. 3.5 dia. 1,750 1,300 870 (350) 2 dia. 460 340 225 (100) 2 dia. flexi b le break-resistant fl u ororesin coating
35 lens units *1. the values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set to optimum values. *2. the optical fiber is 2 m long on each si de, so the sensing distance is 4,000 mm. type appearance dimen- sions page applicable fiber units sensing distance (mm) standard object (min. sensing object) (mm) *1 features model number high- resolution mode standard mode high- speed mode super- high- speed mode 60 e32-t11l 4,000*2 3,200 2,100 840 4 dia. (0.1 dia.) long-dis- tance sensing; opening angle: 5 to 40 (heat resistant up to 200 c) e39-f1 e32-tc200 4,000*2 4,000*2 2,600 1,500 e32-t11r 4,000*2 3,700 2,400 970 e32-t11 4,000*2 3,600 2,300 930 e32-t11u 4,000*2 3,600 2,300 930 e32-t81r-s 2,650 2,100 1,300 520 e32-t61-s 4,000*2 3,400 2,200 900 60 e32-t11l 910 800 500 180 3 dia. (0.1 dia.) side-view, space-sav- ing (heat resistant up to 200 c) e39-f2 e32-tc200 840 700 450 160 e32-t11r 520 400 250 100 e32-t11 820 660 430 160 e32-t11u 820 660 430 160 e32-t81r-s 360 280 180 70 e32-t61-s 600 450 300 120 60 e32-t11l e32-tc200 e32-t11r e32-t11 e32-t11u e32-t81r-s e32-t61-s --- --- long dis- tance re- flection (heat resis- tant up to 200 c) e39-f3 60 e32-c42 spot diameter variable in the range 0.1 to 0.6 mm at dis- tances in the range 6 to 15 mm small spot (variable) e39-f3a e32-d32 spot diameter variable in the range 0.5 to 1 mm at dis- tances in the range 6 to 15 mm 60 e32-c41 0.1-dia. spot at a distance of 7 mm small spot e39-f3a-5 e32-c31 0.5-dia. spot at a distance of 7 mm 60 e32-c41 0.2-dia. spot at a distance of 17 mm long dis- tance, small spot e39-f3b e32-c31 0.5-dia. spot at a distance of 17 mm 60 e32-c31 e32-c41 spot diameter of 4 mm max. at distances in the range 0 to 20 mm long-dis- tance sensing, parallel light e39-f3c accessories *when used in combination with the e3x-da-s amplifier unit (general-purpose). t hrough-beam lens units long-distance lens units side-view units reflection units reflective lens units small-spot lens units
36 protective spiral tube note: before using a protective spiral tube, remove the protec tive tube that protects the area between the head and the optical fiber provided with some models. the lens unit and spiral tube cannot be used at the same time. other accessories appearance dimen- sions page application applicable fiber units tube length model number 61 fiber protection m3-screw models e32-d21/e32-d21r e32-dc200e e32-dc200f @ e32-c31 500 mm e39-f32a5 1 m e39-f32a m3-screw models e32-t21 @ (except the e32-t21r.) e32-tc200e e32-tc200f @ 500 mm e39-f32b5 1 m e39-f32b 61 m4-screw models e32-t11 @ (except the e32-t11n right-angle model) e32-tc200 e32-tc200b @ e32-t51 e32-d21l/e32-d21b 500 mm e39-f32c5 1 m e39-f32c 61 m6-screw models e32-d11 @ (except the e32-d11n right-angle model) e32-dc200 e32-dc200b e32-cc200 @ e32-d51 500 mm e39-f32d5 1 m e39-f32d appearance dimensions page application name applicable fiber units remarks model number 62 used to cut the fi- ber. cutter fiber units that allow free cutting provided with applicable fiber units. e39-f4 62 attachments for in- serting thin fibers into amplifier units thin-fiber attach- ments fiber units that allow free cutting and have a 1.0-dia. sheath ? 2 per set ? provided with applicable fi- ber units. e39-f9 62 used to extend fi- bers. fiber con- nectors fiber units that allow free cutting and have a 2.2-dia. sheath --- e39-f10 62 easy-to-use, one- touch relay con- nectors fiber units that allow free cutting e39-f13: used for fiber units with a 2.2-dia. sheath. e39-f14: used for fiber units with a 1.0-dia. sheath. e39-f15: used to connect fi- ber units with different sheath diameters, 1.0 mm and 2.2 mm. e39-f13 e39-f14 e39-f15 62 used to bends in sleeves. sleeve bender e32-tc200b(4) e32-tc200f(4) e32-dc200f(4) --- e39-f11 62 used to secure the 3.5-dia. fiber head mounting bracket e32-t24s e32-a03 provided with applicable fiber units. e39-l83 accessories
37 ratings/characteristics models ambient operating temperature range ambient hu- midity range fiber core material (sheath material) permissible bend- ing radius tightening force (nm) pulling force (n) iec standard de- gree of protection e32-d11 ? 40 to +70 c 35% to 85% plastic (pvc coating) r4 0.98 29.4 ip67 e32-d11n plastic (pvc coating) r1 0.98 29.4 ip67 e32-d11r plastic (pvc coating) r1 0.98 29.4 ip67 e32-d11u plastic (fluororesin coating) r4 0.98 29.4 ip67 e32-d12 plastic (polyethylene coating) r25 0.29 29.4 ip67 e32-d12r plastic (pvc coating) r1 0.29 29.4 ip67 e32-d14l plastic (polyethylene coating) r25 0.98 29.4 ip67 e32-d14lr plastic (pvc coating) r1 0.98 29.4 ip67 e32-d15x plastic (polyethylene coating) r25 0.15 29.4 ip67 e32-d15xb plastic (pvc coating) r4 0.15 29.4 ip67 e32-d15xr plastic (pvc coating) r1 0.15 29.4 ip67 e32-d15y plastic (polyethylene coating) r25 0.15 29.4 ip40 e32-d15yr plastic (pvc coating) r1 0.15 29.4 ip40 e32-d15z plastic (polyethylene coating) r25 0.15 29.4 ip40 e32-d15zr plastic (pvc coating) r1 0.15 29.4 ip40 e32-d21 plastic (pvc coating) r4 0.78 9.8 ip67 e32-d211 plastic (polyethylene coating) r10 0.78 9.8 ip67 e32-d211r plastic (polyethylene coating) r1 0.78 9.8 ip67 e32-d21b plastic (pvc coating) r4 0.78 9.8 ip67 e32-d21r plastic (polyethylene coating) r1 0.78 9.8 ip67 e32-d22 plastic (polyethylene coating) r10 0.29 9.8 ip67 e32-d221b plastic (pvc coating) r4 0.29 9.8 ip67 e32-d22b plastic (pvc coating) r4 0.20 9.8 ip67 e32-d22r plastic (polyethylene coating) r1 0.29 9.8 ip67 e32-d24 plastic (polyethylene coating) r10 0.29 9.8 ip67 e32-d24r plastic (polyethylene coating) r1 0.29 9.8 ip67 e32-d25x plastic (polyethylene coating) r10 0.15 9.8 ip67 e32-d25xb plastic (pvc coating) r4 0.15 9.8 ip67 e32-d25xr plastic (polyethylene coating) r1 0.15 9.8 ip67 e32-d25y plastic (polyethylene coating) r10 0.15 9.8 ip40 e32-d25yr plastic (polyethylene coating) r1 0.15 9.8 ip40 e32-d25z plastic (polyethylene coating) r10 0.15 9.8 ip40 e32-d25zr plastic (polyethylene coating) r1 0.15 9.8 ip40 e32-dc200 plastic (polyethylene coating) r25 0.98 29.4 ip67 e32-dc200b(b4) plastic (polyethylene coating) r25 0.98 29.4 ip67 e32-dc200br(b4r) plastic (pvc coating) r1 0.98 29.4 ip67 e32-dc200e plastic (polyethylene coating) r10 0.78 9.8 ip67 e32-dc200f(f4) plastic (polyethyl ene coating) r10 0.78 9.8 ip67 e32-dc200fr(f4r) plastic (polyethylene coating) r1 0.78 9.8 ip67 e32-t11 plastic (pvc coating) r4 0.78 29.4 ip67 e32-t11n plastic (pvc coating) r1 0.78 29.4 ip67 e32-t11r plastic (pvc coating) r1 0.78 29.4 ip67 e32-t11u plastic (fluororesin coating) r4 0.78 29.4 ip67 e32-t12 plastic (polyethylene coating) r25 0.29 29.4 ip67 e32-t12b plastic (pvc coating) r4 0.29 29.4 ip67 e32-t12r plastic (pvc coating) r1 0.29 29.4 ip67 e32-t14l plastic (polyethylene coating) r25 0.29 29.4 ip67 e32-t14lr plastic (pvc coating) r1 0.29 29.4 ip67 e32-t15x plastic (polyethylene coating) r25 0.15 29.4 ip67 e32-t15xb plastic (pvc coating) r4 0.15 29.4 ip67 e32-t15xr plastic (pvc coating) r1 0.15 29.4 ip67 e32-t15y plastic (polyethylene coating) r25 0.15 29.4 ip40 e32-t15yr plastic (pvc coating) r1 0.15 29.4 ip40 e32-t15z plastic (polyethylene coating) r25 0.15 29.4 ip40 e32-t15zr plastic (pvc coating) r1 0.15 29.4 ip40 e32-t21 plastic (pvc coating) r4 0.78 9.8 ip67 e32-t21r plastic (polyethylene coating) r1 0.78 29.4 ip67 e32-t22 plastic (polyethylene coating) r10 0.29 9.8 ip67 e32-t221b plastic (pvc coating) r4 0.29 9.8 ip67 e32-t222 plastic (polyethylen e coating) r10 0.20 9.8 ip67 e32-t222r plastic (polyethylene coating) r1 0.20 9.8 ip67 e32-t22b plastic (pvc coating) r4 0.20 9.8 ip67 e32-t22r plastic (polyethylene coating) r1 0.29 9.8 ip67 standard models
38 *the strength depends on the section. use 0.49 n ? m max. to 5 mm from the tip and 0.78 n ? m max. at a distance of more than 5 mm from the tip. models ambient operating temperature range ambient hu- midity range fiber core material (sheath material) permissible bend- ing radius tightening force (nm) pulling force (n) iec standard de- gree of protection e32-t24 ? 40 to +70 c 35% to 85% plastic (polyethylene coating) r10 0.29 9.8 ip67 e32-t24r plastic (polyethylene coating) r1 0.29 9.8 ip67 e32-t25x plastic (polyethylen e coating) r10 0.15 9.8 ip67 e32-t25xb plastic (pvc coating) r4 0.15 9.8 ip67 e32-t25xr plastic (polyethylene coating) r1 0.15 9.8 ip67 e32-t25y plastic (polyethylen e coating) r10 0.15 9.8 ip40 e32-t25yr plastic (polyethylene coating) r1 0.15 9.8 ip40 e32-t25z plastic (polyethylen e coating) r10 0.15 9.8 ip40 e32-t25zr plastic (polyethylene coating) r1 0.15 9.8 ip40 e32-tc200 plastic (polyethylene coating) r25 0.78 29.4 ip67 e32-tc200a plastic (polyethylene coating) r25 0.78 29.4 ip67 e32-tc200b(b4) plastic (polyethylene coating) r25 0.78 29.4 ip67 e32-tc200br(b4r) plastic (pvc coating) r1 0.78 29.4 ip67 e32-tc200e plastic (polyethylene coating) r10 0.78 9.8 ip67 e32-tc200f(f4) plastic (polyethylene coating) r10 0.78 9.8 ip67 e32-tc200fr(f4r) plastic (polyethylene coating) r1 0.78 9.8 ip67 models ambient operating temperature range ambient hu- midity range fiber core material (sheath material) permissible bend- ing radius tightening force (nm) pulling force (n) iec standard de- gree of protection e32-a10 ? 40 to +70 c 35% to 85% plastic (polyethylene coating) r25 0.53 29.4 ip30 e32-c11n ? 40 to +70 c plastic (combination of pvc and polyethylene) r4 0.98 29.4 ip67 e32-c31 ? 40 to +70 c plastic (polyethylene coating) r25 0.78 9.8 ip67 e32-c31n ? 40 to +70 c plastic (combination of pvc and polyethylene) r4 0.29 9.8 ip67 e32-c41 ? 40 to +70 c plastic (polyethylene coating) r25 0.78 9.8 ip67 e32-c42 ? 40 to +70 c plastic (polyethylene coating) r25 0.29 9.8 ip67 e32-cc200 ? 40 to +70 c plastic (polyethylene coating) r25 0.98 29.4 ip67 e32-cc200r ? 40 to +70 c plastic (polyethylene coating) r4 0.98 29.4 ip67 e32-d11l ? 40 to +70 c plastic (polyethylene coating) r25 0.98 29.4 ip67 e32-d16 ? 40 to +70 c plastic (pvc coating) r4 0.53 29.4 ip40 e32-d21l ? 40 to +70 c plastic (polyethylene coating) r10 0.78 9.8 ip67 e32-d22l ? 40 to +70 c plastic (polyethylene coating) r10 0.29 9.8 ip67 e32-d32 ? 40 to +70 c plastic (polyethylene coating) r25 0.29 9.8 ip67 e32-d32l ? 40 to +70 c plastic (polyethylene coating) r25 0.29 29.4 ip67 e32-d33 ? 40 to +70 c plastic (polyethylene coating) r4 0.29 9.8 ip67 e32-d331 ? 40 to +70 c plastic (polyethylene coating) r4 0.29 9.8 ip67 e32-d36p1 ? 40 to +70 c plastic (polyethylene coating) r4 0.78 29.4 ip67 e32-l24l ? 40 to +105 c plastic (polyethylene coating) r10 0.29 9.8 ip50 E32-L24S ? 40 to +70 c plastic (polyethylene coating) r10 0.29 9.8 ip40 e32-l25 ? 40 to +70 c plastic (polyethylene coating) r25 0.29 19.6 ip50 e32-l25a ? 40 to +70 c plastic (polyethylene coating) r25 0.29 19.6 ip50 e32-l25l ? 40 to +105 c plastic (polyethylene coating) r10 0.29 9.8 ip50 e32-l64 ? 40 to +300 c glass (sus spiral coating) r25 0.54 9.8 ip50 e32-l86 ? 40 to +200 c glass (sus spiral coating) r25 0.54 9.8 ip40 e32-m21 ? 40 to +70 c plastic (pvc coating) r25 0.49. 0.78* 9.8 ip50 e32-r16 ? 25 to +55 c plastic (polyethylene coating) r25 0.54 29.4 ip66 e32-r21 ? 40 to +70 c plastic (polyethylene coating) r10 0.39 9.8 ip67 e32-t11l ? 40 to +70 c plastic (polyethylene coating) r25 0.78 29.4 ip67 e32-t12l ? 40 to +70 c plastic (polyethylene coating) r25 0.29 29.4 ip67 e32-t14 ? 40 to +70 c plastic (polyethylene coating) r25 0.49 29.4 ip67 e32-t16 ? 40 to +70 c plastic (polyethylene coating) r25 0.49 29.4 ip67 e32-t16j ? 40 to +70 c plastic (pvc coating) r10 0.29 29.4 ip50 e32-t16jr ? 40 to +70 c plastic (pvc coating) r1 0.29 29.4 ip50 e32-t16p ? 40 to +70 c plastic (pvc coating) r10 0.29 29.4 ip50 e32-t16pr ? 40 to +70 c plastic (pvc coating) r1 0.29 29.4 ip50 e32-t16w ? 25 to +55 c plastic (pvc coating) r10 0.29 9.8 ip50 e32-t16wr ? 25 to +55 c plastic (pvc coating) r1 0.29 9.8 ip50 e32-t17l ? 40 to +70 c plastic (polyethylene coating) r25 0.78 29.4 ip67 e32-t21l ? 40 to +70 c plastic (polyethylene coating) r10 0.78 9.8 ip67 e32-t223r ? 40 to +70 c plastic (polyethylene coating) r1 0.20 9.8 ip67 e32-t22l ? 40 to +70 c plastic (polyethylene coating) r10 0.29 9.8 ip67 e32-t22s ? 40 to +70 c plastic (pvc coating) r10 0.29 29.4 ip50 e32-t24s ? 40 to +70 c plastic (pvc coating) r10 0.29 29.4 ip50 e32-t333-s5 ? 40 to +70 c plastic (polyethylene coating) r10 0.29 9.8 ip67 e32-t334-s5 ? 40 to +70 c plastic (polyethylene coating) r10 0.29 9.8 ip67 e32-t33-s5 ? 40 to +70 c plastic (pvc coating) r10 0.29 9.8 ip67 standard models (continued) special-beam models
39 models ambient operating temperature range ambient hu- midity range fiber core material (sheath material) permissible bend- ing radius tightening force (nm) pulling force (n) iec standard de- gree of protection e32-d12f ? 40 to +70 c 35% to 85% plastic (fluororesin coating) r40 0.78 29.4 ip67 e32-d14f ? 40 to +70 c plastic (fluororesin coating) r40 0.78 29.4 ip67 e32-d51 ? 40 to +150 c plastic (fluororesin coating) r35 0.98 29.4 ip67 e32-d61 ? 60 to +350 c glass (sus spiral coating) r25 0.98 29.4 ip67 e32-d61-s ? 60 to +350 c glass (sus spiral coating) r25 0.98 29.4 ip67 e32-d73 ? 40 to +400 c glass (sus spiral coating) r25 0.78 29.4 ip67 e32-d73-s ? 40 to +400 c glass (sus spiral coating) r25 0.78 29.4 ip67 e32-d81r ? 40 to +200 c glass (fluororesin coating) r10 0.78 9.8 ip67 e32-d81r-s ? 40 to +200 c glass (fluororesin coating) r10 0.78 9.8 ip67 e32-t11f ? 40 to +70 c plastic (fluororesin coating) r4 0.29 29.4 ip67 e32-t12f ? 40 to +70 c plastic (fluororesin coating) r40 0.78 29.4 ip67 e32-t14f ? 40 to +70 c plastic (fluororesin coating) r40 0.78 29.4 ip67 e32-t51 ? 40 to +150 c plastic (fluororesin coating) r35 0.78 29.4 ip67 e32-t51f ? 40 to +150 c plastic (fluororesin coating) r40 0.78 29.4 ip67 e32-t51v ? 25 to +120 c glass (fluororesin coating) r30 0.29 29.4 --- e32-t54 ? 40 to +150 c plastic (fluororesin coating) r35 0.29 29.4 ip67 e32-t54v ? 25 to +120 c glass (fluororesin coating) r30 0.29 29.4 --- e32-t61-s ? 60 to +350 c glass (sus spiral coating) r25 0.78 29.4 ip67 e32-t81f-s ? 40 to +200 c glass (fluororesin coating) r10 0.78 9.8 ip67 e32-t81r-s ? 40 to +200 c glass (fluororesin coating) r10 0.78 9.8 ip67 e32-t84s-s ? 40 to +200 c glass (fluororesin coating) r25 0.29 9.8 ip67 e32-t84sv ? 25 to +200 c glass (sus spiral coating) r25 0.29 29.4 --- models ambient operating temperature range ambient hu- midity range fiber core material (sheath material) permissible bend- ing radius tightening force (nm) pulling force (n) iec standard de- gree of protection e32-a01 ? 40 to +70 c 35% to 85% plastic (fluororesin coating) r4 --- 9.8 ip50 e32-a02 ? 40 to +70 c plastic (fluororesin coating) r4 --- 9.8 ip50 e32-a03 ? 40 to +70 c plastic (polyethylene coating) r1 0.29 9.8 ip50 e32-a03-1 ? 40 to +70 c plastic (polyethylene coating) r10 0.29 9.8 ip50 e32-a04 ? 40 to +70 c plastic (polyethylene coating) r10 0.29 9.8 ip50 e32-a04-1 ? 40 to +70 c plastic (polyethylene coating) r10 0.29 9.8 ip50 e32-a07e1(e2) ? 40 to +70 c plastic (polyethylene coating) r25 0.53 9.8 ip40 e32-a08 ? 40 to +70 c plastic (polyethylene coating) r25 0.53 9.8 ip40 e32-a08h2 ? 40 to +300 c glass (sus spiral coating) r25 0.53 29.4 ip30 e32-a09 ? 40 to +70 c plastic (polyethylene coating) r25 0.53 9.8 ip40 e32-a09h ? 40 to +150 c plastic (fluororesin coating) r35 0.53 9.8 ip40 e32-a09h2 ? 40 to +300 c glass (sus spiral coating) r25 0.53 9.8 ip40 e32-d36t ? 40 to +70 c plastic (polyethylene coating) r4 --- 29.4 ip67 e32-d82f1 ? 40 to +200 c tip: glass and fluororesin coating amplifier insert: plastic (fluororesin coat- ing) r40 0.29 29.4 ip68 e32-d82f2 ? 40 to +200 c (fluororesin coating) r40 0.29 29.4 ip68 e32-g14 ? 40 to +70 c plastic (polyethylene coating) r25 0.49 29.4 ip67 e32-l16-n ? 40 to +70 c plastic (polyethylene coating) r25 0.29 29.4 ip40 e32-l25t ? 40 to +70 c plastic (polyethylene coating) r10 --- 9.8 ip50 e32-l66 ? 40 to +300 c glass (sus spiral coating) r25 0.53 9.8 ip40 e32-t14 ? 40 to +70 c plastic (polyethylene coating) r25 0.49 29.4 ip67 environment-resistant models application-corresponding models
40 dimensions standard/flexible models (unit: mm) tolerance class it16 applies to dimensions in this data sheet unless otherwise specified. through-beam fiber units through-beam models consist of two parts: an emitter and a receiver. standard flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) m4 nuts (brass/nickel plating) washer (nickel-plated iron) included (4 of each) 7 2,000 m2.60.45 m40.7 m 4 0 . 7 (brass/nickel plating) 3 10 (45) 7 5.5 4.7 14.7 1 4 . 7 8.4 dia. 8 . 4 d i a . sensing surface: 1 dia. 2.2 dia. model display tube e32-t11n m2.60.45 sensing surface: 1 dia. width 7, thickness 2.4 (nickel-plated brass) washer (nickel-plated iron) 2.2 dia. 3 14 1 4 2,000 m40.7 m 4 0 . 7 (brass/nickel plating) 3.2 e32-tc200 e32-t11r r25 e32-tc200e r10 2.5 1 dia. 11 1 1 2,000 e39-f9: included sensing surface: 0.5 dia. m30.5 m 3 0 . 5 (brass/nickel plating) width 5.5, thickness 1.8 (nickel-plated brass) washer (nickel-plated brass) 2,000 9.5 13.5 1 3 . 5 3 dia. 2.2 dia. *e32-t21r: 0.5 dia. sensing surface: 1 dia. * width 5.5, thickness 1.8 (nickel-plated brass) washer (nickel-plated brass) m30.5 m 3 0 . 5 (brass/nickel plating) e32-tc200a e32-t21r r25 sensing surface: 0.5 dia. 2 dia. 2 d i a . (sus303) 17 22 2 2 2,000 12 e39-f9: included 1 dia. 1.4 dia. heat-shrinkable tube e32-t22 e32-t22r r10 sensing surface: 1 dia. 3 2.4 dia. 3 dia. 3 d i a . (brass/nickel plating) 2.2 dia. 11 14 1 4 2,000 e32-t12 e32-t12r r25 10 1 0 2,000 e39-f9: included 1.5 dia. 1 . 5 d i a . (brass/nickel plating) sensing surface: 0.5 dia. 1 dia. e32-t222 e32-t222r r10 2.2 dia. two, 2.2 dia. mounting holes with two, 4.4 dia. countersinks on both sides (aluminum) 2,000 8 3 2.5 1.5 sensing surface: 1 dia. 15 1 5 7.5 5.5 e32-t15x e32-t15xr r25 note: 1. set of two symmetrical parts. 2. mounting screws (countersunk screw m2 8 4 pcs) included 1 dia. (aluminum) mounting holes two 2.2 dia. tw o, 4.4 dia. countersinks on one side 7 1 sensing surface: 0.5 dia. 2,000 e39-f9: included 2 12 1 2 5 2.5 4.5 e32-t25x e32-t25xr r10 note: 1. set of two symmetrical parts. 2. mounting screws (countersunk screw m2 8 4 pcs) included 3.2 stainless-steel tube 1.2 dia. max. (sus304) * ( ): e32-tc200b4/e32tc200b4r 2.2 dia. 11 1 1 90 9 0 ( 40 4 0 )* 2,000 sensing surface: 1 dia. m40.7 m 4 0 . 7 (coarse thread) (brass/nickel plating) width 7, thickness 2.4 (nickel-plated brass) washer (nickel-plated iron) e32-tc200b e32-tc200b4 e32-tc200br e32-tc200b4r r25 r25 2.5 2,000 11 1 1 sensing surface: 0.5 dia. stainless-steel tube 0.9 dia. max. (sus304) width 5.5, thickness 1.8 (nickel-plated brass) washer (nickel-plated brass) 1 dia. 90 9 0 ( 40 4 0 )* e39-f9: included * ( ):e32-tc200f4/e32tc200f4r m30.5 m 3 0 . 5 (brass/nickel plating) e32-tc200f e32-tc200f4 e32-tc200fr e32-tc200f4r r10 r10 35 3 5 sensing surface 30 2 3 dia. 2.8 3 dia. 3 d i a . (sus303) heat-shrinkable tube 2.2 dia. 12 2,000 e32-t14l e32-t14lr r25
41 standard/flexible models through-beam fiber units through-beam models consist of two parts: an emitter and a receiver. standard flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) 35 2,000 15 1 5 1.25 15 1 5 12 e39-f9: included stainless-steel tube 1 dia. max. heat-shrinkable tube 1 dia. 2 dia. 2 d i a . (sus304) 1.4 dia. sensing surface e32-t24 e32-t24r r10 8 8 (aluminum) sensing surface 3 3 4 2.2 dia. two, 2.2 dia. mounting holes with two, 4.4 dia. countersinks on both sides 5.5 7.5 15 1 5 2,000 2.5 e32-t15y e32-t15yr r25 note: 1. set of two symmetrical parts. 2. mounting screws (countersunk screw m2 8 4 pcs) included sensing surface (aluminum) 2 2 3 1 dia. e39-f9: included 7 7 4.5 5 12 1 2 2.5 two, 2.2 dia. mounting holes with two, 4.4 dia. countersinks on one side 2,000 e32-t25y e32-t25yr r10 note: 1. set of two symmetrical parts. 2. mounting screws (countersunk screw m2 8 4 pcs) included 8 8 (aluminum) sensing surface 4 3 3 2.2 dia. 2.5 1.5 7.5 15 1 5 5.5 2,000 two, 2.2 dia. mounting holes with two, 4.4 dia. countersinks on both sides e32-t15z e32-t15zr r25 note: 1. set of two symmetrical parts. 2. mounting screws (countersunk screw m2 8 4 pcs) included sensing surface (aluminum) 1 dia. e39-f9: included two, 2.2 dia. mounting holes with two, 4.4 dia. countersinks on one side 7 7 4.5 1 3 2 2 5 2.5 12 1 2 2,000 e32-t25z e32-t25zr r10 note: 1. set of two symmetrical parts. 2. mounting screws (countersunk screw m2 8 4 pcs) included mounting hole dimensions (recommended) (unit:mm) example: head size of e32-tc200 is m4. open the mounting holes with 4 to 4.5 dia. (unit:mm) example: head size of e32-t22 is 2 dia.. o pen the mounting holes with 2.2 to 2.4 dia. minimum bending radius (unit:mm ) outer diameter of fiber unit m3 m4 m6 m14 f dimensions 3 dia. 4 dia. 6 dia. 14 dia. outer diameter of fiber unit 1 dia. 1.5 dia. 2 dia. 3 dia. f dimensions 1.2 dia. 1.7 dia. 2.2 dia. 3.2 dia. outer diameter of fiber unit 3.5 dia. 4 dia. 5 dia. 6 dia. f dimensions 4 dia. 4.5 dia. 5.5 dia. 6.5 dia. f +0.5 0 +0.5 0 +0.5 0 +1 0 +0.2 0 +0.2 0 +0.2 0 +0.2 0 +0.5 0 +0.5 0 +0.5 0 +0.5 0 type a minimum bending radius b unbendable (except e32-c11n, e32-c31n and e32-cc200) 10 (e32-c11n, e32-c31n, e32-cc200r) 40 4 10 10 10 25 10 30 10 35 10 40 10 unbendable b minimum bending radius a sensing head flexible break-resistant fluororesin coating standard r @ r4 r10 r25 r30 r35 r40
42 break-resistant/coated models standard models flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) 15 14 1 4 2,000 2.2 dia. width 7, thickness 2.4 (nickel-plated brass) washer (nickel-plated iron) protective tube 3.3 m2.60.45 sensing surface: 1 dia. m40.7 m 4 0 . 7 (brass/nickel plating) 3.2 e32-t11 e32-t11u protective tube 1 dia. 2,000 11 1 1 15 sensin g surface: 0.5 dia. m30.5 m 3 0 . 5 (brass/nickel plating) e39-f9: included width 5.5, thickness 1.8 (nickel-plated brass) washer (nickel-plated brass) 2.5 e32-t21 e32-t12b 3 2.4 dia. 2.2 dia. 11 14 1 4 2,000 sensing surface: 1 dia. 3 dia. 3 d i a . (brass/nickel plating) e32-t221b 2 dia. 2 d i a . (sus303) 17 22 2 2 2,000 12 1 dia. 1.4 dia. heat-shrinkable tube sensing surface: 0.5 dia. e39-f9: included e32-t22b 10 1 0 2,000 1 dia. 1.5 dia. 1 . 5 d i a . (brass/nickel plating) sensing surface: 0.5 dia. e39-f9: included 2.2 dia. 8 3 5.5 1.5 15 1 5 7.5 two, 2.2 dia. mounting holes with two, 4.4 dia. countersinks on both sides 2.5 (aluminum) sensing surface: 1 dia. 2,000 e32-t15xb note: 1. set of two symmetrical parts. 2. mounting screws (countersunk screw m2 8 4 pcs) included 1 dia. (aluminum) 12 1 2 2 7 4.5 1 sensing surface: 0.5 dia. e39-f9: included 2,000 two, 2.2 dia. mounting holes with two, 4.4 dia. countersinks on one side 5 2.5 e32-t25xb note: 1. set of two symmetrical parts. 2. mounting screws (countersunk screw m2 8 4 pcs) included
43 long-distance/high-power models through-beam fiber units through-beam models consist of two parts: an emitter and a receiver. special-beam models flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) sensing surface lens diameter: 10 dia. (pmma) width 19, thickness 5 (aluminum) 2.2 dia. 23 2 3 42 10,000 m141 m 1 4 1 (abs) e32-t17l r25 10 0.2 9.2 7 8 2.5 10.5 1 0 . 5 r3.5 two, 3.2 dia. mounting holes heat-resistant abs sensing surface lens (pmma) 4.4 dia. nitrile rubber 8.2 16 25.2 2 5 . 2 11.2 2,000 2.2 dia. 8 e32-t14 r25 m2.60.45 width 7, thickness 2.4 (nickel-plated brass) washer (nickel-plated iron) 2.2 dia. 3 11 2,000 m40.7 m 4 0 . 7 (brass/nickel plating) 14 1 4 sensing surface: 1.4 dia. 3.2 e32-t11l r25 e32-t12l r25 3 2.4 dia. 2.2 dia. 11 2,000 3 dia. 3 d i a . (brass/nickel plating) sensing surface: 1.4 dia. 14 1 4 e32-t21l r10 11 1 1 (1.7) 2,000 width 5.5, thickness 1.8 (nickel-plated brass) washer (nickel-plated brass) 1 dia. m30.5 m 3 0 . 5 (brass/nickel plating) sensing surface 0.9 dia. e39-f9: included 2.5 e32-t22l r10 (2) sensing surface 0.9 dia. 1.8 dia. 17 22 2 2 2,000 12 1 dia. heat-shrinkable tube 2 dia. 2 d i a . (sus304) e39-f9: included mounting hole dimensions (recommended) (unit:mm) example: head size of e32-tc200 is m4. open the mounting holes with 4 to 4.5 dia. (unit:mm) example: head size of e32-t22 is 2 dia.. o pen the mounting holes with 2.2 to 2.4 dia. minimum bending radius (unit:mm ) outer diameter of fiber unit m3 m4 m6 m14 f dimensions 3 dia. 4 dia. 6 dia. 14 dia. outer diameter of fiber unit 1 dia. 1.5 dia. 2 dia. 3 dia. f dimensions 1.2 dia. 1.7 dia. 2.2 dia. 3.2 dia. outer diameter of fiber unit 3.5 dia. 4 dia. 5 dia. 6 dia. f dimensions 4 dia. 4.5 dia. 5.5 dia. 6.5 dia. f +0.5 0 +0.5 0 +0.5 0 +1 0 +0.2 0 +0.2 0 +0.2 0 +0.2 0 +0.5 0 +0.5 0 +0.5 0 +0.5 0 type a minimum bending radius b unbendable (except e32-c11n, e32-c31n and e32-cc200) 10 (e32-c11n, e32-c31n, e32-cc200r) 40 4 10 10 10 25 10 30 10 35 10 40 10 unbendable b minimum bending radius a sensing head flexible break-resistant fluororesin coating standard r @ r4 r10 r25 r30 r35 r40
44 ultracompact/thin-sleeve models fine-beam (narrow vision field) models area-sensing models through-beam fiber units through-beam models consist of two parts: an emitter and a receiver. special-beam models flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) 10 1 0 2,000 sensing surface 0.5 dia. 1 dia. 1 dia. 1 d i a . (stainless steel) e39-f9: included e32-t223r 5 heat-shrinkable tube sensing surface 0.25 dia. 0.5 dia. 10 1 0 12 1 dia. 1,000 20 3 dia. 3 d i a . (sus303) e39-f9: included e32-t33-s5 r10 heat-shrinkable tube fiber attachment* sensing surface 0.125 dia. 1 dia. 1,000 12 20 10 1 0 5 0.25 dia. 3 dia. 3 d i a . (sus303) e32-t333-s5 r10 *the fiber attachment is attached wit h adhesive and cannot be removed. heat-shrinkable tube sensing surface 0.1 dia. 1 dia. 1,000 12 20 10 1 0 5 0.22 dia. 3 dia. 3 d i a . (sus303) fiber attachment* e32-t334-s5 r10 *the fiber attachment is attached wit h adhesive and cannot be removed. special-beam models 15 1 5 2.2 dia. 2,000 sensing surface 1.7 dia. 3 dia. 3 d i a . (brass/nickel plating) e32-t22s r10 3.2 10 e39-l83 mounting bracket (sus) (provided) 2.2 dia. 1.8 20.5 2 0 . 5 2 dia. 2 sensing surface 2,000 11 3 3.5 dia. 3 . 5 d i a . 0.4 17.6 3.2 (brass/nickel plating) e32-t24s r10 special-beam models sensing surface (330)(pmma) 18 69 two, 3.2 dia. mounting holes with two, 6 dia. countersinks 2.2 dia. 65 6 5 45 2,000 12 23 2 3 18.5 5 (abs) e32-t16w e32-t16wr r10 28 23 11 1 1 2,000 width 5.5, thickness 1.8 (nickel-plated brass) washer (nickel-plated brass) silicon tube * four, 1 dia. *one set of silicon tubes is black and the other set is gray. usethis difference to distinguish between the emission and reception sides. m30.35 m 3 0 . 3 5 (sus303) e32-m21 r25
45 area-sensing models special-beam models flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) e32-t16p e32-t16pr r10 sensing surface (211) (pmma) *provided with stickers with slits of width 0.5 and 1 mm (2 of each). (heat-resistant abs) 19 27 2 7 14.5 1 4 . 5 10.7 2,000 7 4 two, 3.2 dia. mounting holes with two, 6 dia. countersinks on both sides 4 2.2 dia. 2,000 43.2 58 32.5 6 dia. 25 2 5 *provided with stickers with slits of width 0.5 and 1 mm (2 of each). (heat-resistant abs) sensing surface (210) (pmma) mounting bracket (zinc-plated iron) provided 8.4 8 . 4 2.2 dia. 33 15.5 1 5 . 5 2-m3 8.85 3 2 20 2 0 20 20 e32-t16 r25 4 3.3 sensing surface (211) (pmma) r ece i ver emitter 27 2 7 7 2 14.5 17.8 1 7 . 8 10.7 2,000 2.2 dia. 19 (abs) two, 3.2 dia. mounting holes with two, 6 dia. countersinks on both sides 4 e32-t16j e32-t16jr r10 mounting hole dimensions (recommended) (unit:mm) example: head size of e32-tc200 is m4. open the mounting holes with 4 to 4.5 dia. (unit:mm) example: head size of e32-t22 is 2 dia.. o pen the mounting holes with 2.2 to 2.4 dia. minimum bending radius (unit:mm ) outer diameter of fiber unit m3 m4 m6 m14 f dimensions 3 dia. 4 dia. 6 dia. 14 dia. outer diameter of fiber unit 1 dia. 1.5 dia. 2 dia. 3 dia. f dimensions 1.2 dia. 1.7 dia. 2.2 dia. 3.2 dia. outer diameter of fiber unit 3.5 dia. 4 dia. 5 dia. 6 dia. f dimensions 4 dia. 4.5 dia. 5.5 dia. 6.5 dia. f +0.5 0 +0.5 0 +0.5 0 +1 0 +0.2 0 +0.2 0 +0.2 0 +0.2 0 +0.5 0 +0.5 0 +0.5 0 +0.5 0 type a minimum bending radius b unbendable (except e32-c11n, e32-c31n and e32-cc200) 10 (e32-c11n, e32-c31n, e32-cc200r) 40 4 10 10 10 25 10 30 10 35 10 40 10 unbendable b minimum bending radius a sensing head flexible break-resistant fluororesin coating standard r @ r4 r10 r25 r30 r35 r40
46 heat-resistant models chemical-resistant models through-beam fiber units through-beam models consist of two parts: an emitter and a receiver. environment-resistant models flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) 15 2.85 dia. 1 sensing surface 1.5 dia. 17 1 7 2,000 2.2 dia. width 7, thickness 2.4 (nickel-plated brass) washer (nickel-plated iron) m40.7 m 4 0 . 7 (brass/nickel plating) e32-t51 r35 note: the maximum allowable temperature is 150 c. the maximum al- lowable temperature for continuous operation is 130 c. e32-t54 r35 note: the maximum allowable temperature is 150 c. the maximum allowable temperature for continuous operation is 130 c. 2.45 2 dia. 45 sensing surface 25 2 5 20 2 0 2.2 dia. 2,000 3 dia. 3 d i a . (sus303) sensing surface 0.7 dia. 20 2 0 3 4 dia. 10 2,000 30(b) * a 4 dia. fluororesin tube 2 dia. protective tube m2.60.45 2.2 dia. (75) m40.7 m 4 0 . 7 ( sus303 ) width 7, thickness 2.4 (sus304) washer (sus) note: the maximum allowable temperatures for sec- tions a and b are 200 c and 110 c, respective- ly. the section inserted into the amplifier unit (indicated by *), however, must stay within the amplifier unit's operating temperature range. e32-t81r-s r10 e32-t84s-s r25 sensing surface lens (2 dia.) * 25(b) a 12 1 2 14.2 1 4 . 2 6 30 max. 3 0 m a x . 12 2,000 4 dia. 4 dia. 4 d i a . 3 dia. 3.5 dia. r5 90 flexible tube: 2.9 dia. (stainless steel) 2.2 dia. 3 dia. 3 d i a . (sus303) 30 note: the maximum allowable temperatures for sections a and b are 200 c and 110 c, respectively. the section in- serted into the amplifier unit (indicated by *), however, must stay within the amplifier unit's operating temperature range. e32-t61-s r25 20 2 0 3 4 dia. *2 10 2,000 25(b) *1 a 4 dia. 2.8 dia. flexible tubes (sus304) m2.60.45 *2 the diameter is 6 mm if the fiberlength exceeds 10 m. 2.2 dia. m40.7 m 4 0 . 7 (sus303) sensing surface 1 dia. width 7, thickness 2.4 (sus304) washer (sus) 30 note: the maximum allowable temperatures for sections a and b are 200 c and 110 c, respectively. the section inse rted into the amplifier unit (in- dicated by *1), however, must stay within the amplifier unit's operating temperature range. environment-resistant models nut (pfa) 2.2 dia. (fluororesin) lens diameter: 3.7 mm 10 1 0 (10.7) 35 3 5 19.8 3 10 2,000 r3.6 7.2 dia. 7 . 2 d i a . (pfa) e32-t11f r4 e32-t12f r40 20 2 0 2,000 5 dia. 5 d i a . (fluororesin) 4 dia. 2.2 dia. sensing surface lens 4 dia. 100 21 2 1 2,000 5 dia. 5 d i a . (fluororesin) 4 dia. 2.2 dia. 100 4.5 e32-t14f r40 100 20 2 0 2,000 sensing surface lens diameter: 3.7 dia. 2.2 dia. 5 dia. 5 d i a . (fluororesin) e32-t51f r40 sensing surface: 3.7 dia 30 3 0 (0.8) 2,000 * (70) 30 ( b ) a 4 dia. 2.2 dia. protective tube 2 dia. (pfa tube) pfa cover (r6) 6 dia. 6 d i a . e32-t81f-s r10 note: the maximum allowable temperatures for sec- tions a and b are 200 c and 110 c, respective- ly. the section inserted into the amplifier unit (indicated by *), however, must stay within the amplifier unit's operating temperature range.
47 vacuum-resistant models environment-resistant models flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) e32-t51v r30 3 m2.60.45 4 dia. 3 dia. 4 dia. connected to flange (vacuum side) 2.2 dia. 20 2 0 (30) 1,000 26 m40.7 m 4 0 . 7 (aluminum) sensing surface 1.15 dia. width 8 (sus304) washer (sus304) 18 1 8 4.5 3 12 1 2 m2.60.45 sensing surface: 1.15 dia. 4 4 4 4 4 dia. 4 dia. connected to flange (vacuum side) 3 dia. 2.2 dia. 5 dia. r9 (3) 8 1,000 26 15 1 5 3 dia. 3 d i a . (sus304) e32-t54v r30 sensing surface: 2 dia. 12 r5 3 dia. 3.5 dia. 90 flexible tube: (stainless steel) 2.9 dia. 4 dia. 4 d i a . 4 dia. 2.2 dia. connected to flange (vacuum side) 30 max. 3 0 m a x . 12 1 2 1,000 26 6 14.2 1 4 . 2 3 dia. 3 d i a . (sus304) e32-t84sv r25 8.9 0.5 dia. hole 6 m2.60.45 effective depth: 3.8 spot-facing depth: 0.9 4 dia. e39-f1v material: aluminum for body and optical glass for the lens itself. 36 dia. 49 70 dia. 44 dia. 45 90 dia. 80 80 four, 10 dia. 24 flange v40 o-ring flange 8 e32-vf4 note 1. perform mounting so that the v40 o-ring is on the at- mospheric-pressure side of the vacuum chamber wall. 2. mounting-hole cutout dimensions: 38 dia. 0.5 mm (96) (63) 10 (23) 22 5 19 6 (33.53) 30 20 dia. 22 one nut m142 two, connectors one spring washer v15 o-ring e32-vf1 note 1. perform mounting so that the v15 o-ring is on the atmospheric-pres- sure side of the vacuum chamber wall. 2. mounting-hole cutout dimensions: 14.5 dia. 0.2 mm 2.2 dia. 2,000 e32-t10v-2m r25 material: stainless steel (sus304) e39-l54v 0.5 4 4.5 8 23 15 4.1 4.1 mounting hole dimensions (recommended) (unit:mm) example: head size of e32-tc200 is m4. open the mounting holes with 4 to 4.5 dia. (unit:mm) example: head size of e32-t22 is 2 dia.. o pen the mounting holes with 2.2 to 2.4 dia. minimum bending radius (unit:mm ) outer diameter of fiber unit m3 m4 m6 m14 f dimensions 3 dia. 4 dia. 6 dia. 14 dia. outer diameter of fiber unit 1 dia. 1.5 dia. 2 dia. 3 dia. f dimensions 1.2 dia. 1.7 dia. 2.2 dia. 3.2 dia. outer diameter of fiber unit 3.5 dia. 4 dia. 5 dia. 6 dia. f dimensions 4 dia. 4.5 dia. 5.5 dia. 6.5 dia. f +0.5 0 +0.5 0 +0.5 0 +1 0 +0.2 0 +0.2 0 +0.2 0 +0.2 0 +0.5 0 +0.5 0 +0.5 0 +0.5 0 type a minimum bending radius b unbendable (except e32-c11n, e32-c31n and e32-cc200) 10 (e32-c11n, e32-c31n, e32-cc200r) 40 4 10 10 10 25 10 30 10 35 10 40 10 unbendable b minimum bending radius a sensing head flexible break-resistant fluororesin coating standard r @ r4 r10 r25 r30 r35 r40
48 standard/flexible models fiber units with reflective sensors standard models flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) m6 nuts (brass/nickel plating) washer (nickel -plated iron) included (2 of each) 4.7 11 15.7 1 5 . 7 10 10 8 2,000 (45) 12 dia. 1 2 d i a . s ensing surface: two, 1 dia. model display tube two, 2.2 dia. m60.75 m 6 0 . 7 5 (brass/nickel plating) e32-d11n 4 dia. 3 17 1 7 2,000 width 10, thickness 2.4 (nickel-plated brass) washer (nickel-plated iron) two, 2.2 dia. sensing surface: two, 1 dia. m60.75 m 6 0 . 7 5 (adc) 4.8 e32-dc200 e32-d11r r25 width 7, thickness 2.4 (nickel-plated brass) washer (nickel-plated iron) two, 1 dia. 3 15 1 5 2,000 e39-f9: included m40.7 m 4 0 . 7 (sus303) sensing surface two, 0.5 dia. 3.2 e32-d211 e32-d211r r10 11 1 1 2,000 e39-f9: included width 5.5, thickness 1.8 (nickel-plated brass) washer (nickel-plated brass) two, 1 dia. m30.5 m 3 0 . 5 (sus304) sensing surface two, 0.5 dia. 2.5 2 . 5 e32-dc200e e32-d21r r10 sensing surface two, 1 dia. 2,000 135 heat-shrinkable tube two, 2.2 dia. 15 1 5 3 dia. 3 d i a . (sus304) e32-d12 e32-d12r r25 3 15 1 5 2,000 2.7 dia. two, 1 dia. e39-f9: included sensing surface two, 0.5 dia. 3 dia. 3 d i a . (brass/nickel plating) e32-d22 e32-d22r r10 sensing surface: two, 1 dia. 10 1 0 3 2.5 7.5 2.5 2,000 15 1 5 7.5 two, 2.2 dia. two, 2.2 dia. mounting holes with two, 4.4 dia. countersinks on both sides (aluminum) e32-d15x e32-d15xr r25 note: mounting screws (countersunk screw m2 8 2 pcs) included two, 1 dia. sensing surface 2-0.5 dia. two, 2.2 dia. mounting holes with two, 4.4 dia. countersinks on one side 5.5 1.5 8 5 2.5 12 1 2 2 (aluminum) e39-f9: included 2,000 e32-d25x e32-d25xr r10 note: mounting screws (countersunk screw m2 8 2 pcs) included width 10, thickness 2.4 (nickel-plated brass) washer (nickel-plated iron) stainless-steel tube 2.5 dia. max. (sus304) two, 2.2 dia. 2,000 17 1 7 90 9 0 (40 4 0 )* * ( ):e32-dc200b4/e32-dc200b4r sensing surface: two, 1 dia. m60.75 m 6 0 . 7 5 (brass/nickel plating) (fine thread) 5.2 5 . 2 e32-dc200b e32-dc200b4 e32-dc200br e32-dc200b4b r25 r25 2.5 2 . 5 sensing surface two, 0.5 dia. 11 1 1 2,000 e39-f9: included width 5.5, thickness 1.8 (nickel-plated brass) washer (nickel-plated brass) stainless-steel tube 1.2 dia. max. (sus304) two, 1 dia. 90 9 0 (40 4 0 )* * ( ):e32-dc200f4/e32-dc200f4r m30.5 m 3 0 . 5 (sus304) e32-dc200f e32-dc200f4 e32-dc200fr e32-dc200f4r r10 r10
49 flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) 5.7 5 . 7 6 dia. 6 d i a . 2 sensing surface light baffle two, 2.2 dia. heat-shrinkable tube (sus304) 30 35 3 5 12 2,000 e32-d14l e32-d14lr r25 35 12 15 1 5 15 1 5 1.25 2,000 e39-f9: included heat-shrinkable tube two, 1 dia. 3 dia. 3 d i a . (sus304) stainless-steel tube 2 dia. max. light baffle sensing surface e32-d24 e32-d24r r10 sensing surface 7.5 2.5 2 , 000 15 1 5 2 . 8 3 3 2 . 4 7.5 two, 2.2 dia. mounting holes two, 2.2 dia. tw o, 4.4 dia. countersinks on both sides 10 1 0 (aluminum) e32-d15y e32-d15yr r25 note: mounting screws (countersunk screw m2 8 2 pcs) included two, 2.2 dia. mounting holes with two, 4.4 dia. countersinks on one side two, 1 dia. sensing surface 2.5 5 2,000 1.4 2.3 2 12 1 2 8 e39-f9: included 5.5 (aluminum) e32-d25y e32-d25yr r10 note: mounting screws (countersunk screw m2 8 2 pcs) included sensing surface 7.5 2.5 4 2,000 1.4 2.2 7.5 two, 2.2 dia. two, 2.2 dia. mounting holes with two, 4.4 dia. countersinks on both sides 3 3 15 1 5 10 1 0 (aluminum) e32-d15z e32-d15zr r25 note: mounting screws (countersunk screw m2 8 2 pcs) included sensing surface two, 2.2 dia. mounting holes with two, 4.4 dia. countersinks on one side e39-f9: included two, 1 dia. 2,000 3 5 2.5 0.9 1.2 5.5 2 8 12 1 2 (aluminum) e32-d25z e32-d25zr r10 note: mounting screws (countersunk screw m2 8 2 pcs) included mounting hole dimensions (recommended) (unit:mm) example: head size of e32-tc200 is m4. open the mounting holes with 4 to 4.5 dia. (unit:mm) example: head size of e32-t22 is 2 dia.. o pen the mounting holes with 2.2 to 2.4 dia. minimum bending radius (unit:mm ) outer diameter of fiber unit m3 m4 m6 m14 f dimensions 3 dia. 4 dia. 6 dia. 14 dia. outer diameter of fiber unit 1 dia. 1.5 dia. 2 dia. 3 dia. f dimensions 1.2 dia. 1.7 dia. 2.2 dia. 3.2 dia. outer diameter of fiber unit 3.5 dia. 4 dia. 5 dia. 6 dia. f dimensions 4 dia. 4.5 dia. 5.5 dia. 6.5 dia. f +0.5 0 +0.5 0 +0.5 0 +1 0 +0.2 0 +0.2 0 +0.2 0 +0.2 0 +0.5 0 +0.5 0 +0.5 0 +0.5 0 type a minimum bending radius b unbendable (except e32-c11n, e32-c31n and e32-cc200) 10 (e32-c11n, e32-c31n, e32-cc200r) 40 4 10 10 10 25 10 30 10 35 10 40 10 unbendable b minimum bending radius a sensing head flexible break-resistant fluororesin coating standard r @ r4 r10 r25 r30 r35 r40
50 break-resistant/coated models fiber units with reflective sensors standard models flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) sensing surface two, 1 dia. width 10, thickness 2.4 (nickel-plated brass) washer (nickel-plated iron) protective tube two, 2.2 dia. 1 7 7 15 5.2 2,000 m60.75 m 6 0 . 7 5 (brass/nickel plating) e32-d11 e32-d11u sensing surface two, 0.5 dia. width 7, thickness 2.4 (nickel-plated brass) washer (nickel-plated iron) two, 1 dia. 3 15 1 5 2,000 e39-f9: included m40.7 m 4 0 . 7 (sus303) 3.2 e32-d21b sensing surface four, 0.25 dia. two 0.25 dia. emission fibers two, 0.25 dia. reception fibers width 5.5, thickness 1.8 (nickel-plated brass) washer (nickel-plated brass) two, 1 dia. 15 2.5 11 1 1 2,000 e39-f9: included protective tube m30.5 m 3 0 . 5 (brass/nickel plating) enlarged illustration of sensing surface e32-d21 2,000 two, 1 dia. e39-f9: included sensing surface two, 0.5 dia. 3 dia. 3 d i a . (brass/nickel plating) 15 1 5 e32-d221b 100 2,000 15 sensing surface four, 0.25 dia. 1 dia. brancher (abs): 3.5 dia. fiber attachment* *the attachment is attached with adhesive and cannot be removed. 1.5 dia. 1 . 5 d i a . (sus304) 15 1 5 two 0.25 dia. emission fibers two, 0.25 dia. reception fibers enlarged illustration of sensing surface e32-d22b 15 sensing surface: two, 1 dia. 2.5 7.5 7.5 2,000 2.5 two, 2.2 dia. two, 2.2 dia. mounting holes with two, 4.4 dia. countersinks on both sides 3 10 1 0 (aluminum) e32-d15xb note: mounting screws (countersunk screw m2 8 2 pcs) included two, 1 dia. e39-f9: included sensing surface: two, 1 dia. two, 2.2 dia. mounting holes with two, 4.4 dia. countersinks on one side 2.5 1.5 5 12 5.5 2,000 2 2 8 8 (aluminum) e32-d25xb note: mounting screws (countersunk screw m2 8 2 pcs) included
51 long-distance/high-power models ultracompact/thin-sleeve models special-beam models flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) two, 3.2 dia. mounting holes two, 6 dia. countersinks on both sides sensing surface lens two, 5.8 dia lenses 8.5 11 6.5 two, 2.2 dia. 2,000 22 2 2 17.5 1 7 . 5 9 9 (aluminum) e32-d16 3 5.2 2,000 sensing surface two, 1.4 dia. 4 dia. width 10, thickness 2.4 (nickel-plated brass) washer (nickel-plated iron) two, 2.2 dia. 20 2 0 m60.75 m 6 0 . 7 5 (brass/nickel plating) e32-d11l r25 sensing surface two, 0.9 dia. width 7, thickness 2.4 (nickel-plated brass) washer (nickel-plated iron) two, 1 dia. 3 3.2 2,000 e39-f9: included m40.7 m 4 0 . 7 (brass/nickel plating) 15 1 5 e32-d21l r10 3 2,000 2.7 dia. e39-f9: included sensing surface two, 0.9 dia. two, 1 dia. 15 1 5 3 dia. 3 d i a . (brass/nickel plating) e32-d22l r10 special-beam models stainless-steel tube 0.8 dia. max. heat-shrinkable tube two, 1 dia. 35 2,000 12 e39-f9: included sensing surface two, 0.25 dia. 15 1 5 15 1 5 3 dia. 3 d i a . (sus303) e32-d33 r4 100 2,000 15 stainless-steel tube 0.5 dia. max. brancher: 3.5 dia. fiber attachment* *the attachment is attached with adhesive and cannot be removed. irraxtube: 1.2 dia. sensing surface two, 0.125 dia. 15 1 5 15 1 5 2 dia. 2 d i a . (sus303) e32-d331 r4 mounting hole dimensions (recommended) (unit:mm) example: head size of e32-tc200 is m4. open the mounting holes with 4 to 4.5 dia. (unit:mm) example: head size of e32-t22 is 2 dia.. o pen the mounting holes with 2.2 to 2.4 dia. minimum bending radius (unit:mm ) outer diameter of fiber unit m3 m4 m6 m14 f dimensions 3 dia. 4 dia. 6 dia. 14 dia. outer diameter of fiber unit 1 dia. 1.5 dia. 2 dia. 3 dia. f dimensions 1.2 dia. 1.7 dia. 2.2 dia. 3.2 dia. outer diameter of fiber unit 3.5 dia. 4 dia. 5 dia. 6 dia. f dimensions 4 dia. 4.5 dia. 5.5 dia. 6.5 dia. f +0.5 0 +0.5 0 +0.5 0 +1 0 +0.2 0 +0.2 0 +0.2 0 +0.2 0 +0.5 0 +0.5 0 +0.5 0 +0.5 0 type a minimum bending radius b unbendable (except e32-c11n, e32-c31n and e32-cc200) 10 (e32-c11n, e32-c31n, e32-cc200r) 40 4 10 10 10 25 10 30 10 35 10 40 10 unbendable b minimum bending radius a sensing head flexible break-resistant fluororesin coating standard r @ r4 r10 r25 r30 r35 r40
52 coaxial/small-spot models fiber units with reflective sensors special-beam models flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) sixteen, 0.265 dia. reception fibers 2,000 3 6 18 10 10 8 (45) 1 dia. emission fibers 12 dia. 1 2 d i a . two, 2.2 dia. m6 nuts (brass/nickel plating) washer (nickel-plated iron) included (2 of each) 24 2 4 m60.75 m 6 0 . 7 5 (brass/nickel plating) model display tube e32-c11n 6.5 dia. 6 . 5 d i a . 13.5 20.5 2 0 . 5 7 5.5 5 two, 1 dia. m30.5 m 3 0 . 5 (brass/nickel plating) e39-f9: included model display tube 2,000 (45) 0.5 dia. emission fibers four, 0.25 dia . reception fibers note: the emitter fiber is shown with a white line. m3 nuts (brass/nickel plating) washer (brass/nickel plating) included (2 of each) e32-c31n 1 dia. emission fibers 2.5 dia. two, 2.2 dia. sixteen, 0.25 dia. reception fibers 23 2 3 3 5.2 2,000 m60.75 m 6 0 . 7 5 (brass/nickel plating) width 10, thickness 2.4 (nickel-plated brass) washer (nickel-plated iron) note: there is a white line on the fiber t hat is inserted in the emitter-side port. e32-cc200 e32-cc200r r25 1 dia. emission fibers sixteen, 0.265 dia. reception fibers brancher (heat-resistant, abs, black): 6 dia. two, 2.2 dia. 15 1 5 400 15 1,570 2,000 3 dia. 3 d i a . (sus304) note: there is a yellow dotted line on the fiber that is inserted in the emitter-side port. e32-d32l r25 e39-f9: included 25 2 5 12 20 2. 5 heat-shrinkable tube two, 1 dia. 0.5 dia. emission fibers four, 0.25 dia. reception fibers m30.5 m 3 0 . 5 (sus303) 2,000 width 5.5, thickness 1.8 (nickel-plated brass) washer (nickel-plated brass) e32-c31 r25 note: there is a white line on the cable fiber that is inserted in the emit- ter-side port. e39-f9: included 15 0.5 dia. emission fibers four, 0.25 dia. reception fibers 22 2 2 2,000 12 2 heat-shrinkable tube two, 1 dia. 3 dia. 2 dia. 2 d i a . (sus303) note: there is a white line on the cable fiber that is inserted in the emitter-side port. e32-d32 r25 17 22 2 2 1,000 15 irraxtube: 2.6 dia. brancher (abs resin):3.5 dia. two, 1.2 dia. white markings:emission side (heat-shrinkable tube) 0.175 dia. emission fibers (100) m30.5 m 3 0 . 5 (sus303) width 5.5, thickness 1.8 (nickel-plated brass) washer (nickel-plated brass) fiber attachment* six, 0.175 dia. reception fibers e32-c41 r25 * the fiber attachment is attached with adhesive and cannot be removed. 15 0.175 dia. emission fibers 2 irraxtube: 2.6 dia. two, 1.2 dia. brancher (abs resin): 3.5 dia. white markings: emission side (heat-shrinkable tube) 3 dia. 1,000 15 (100) 22 2 2 2 dia. 2 d i a . (sus303) fiber attachment* six, 0.175 dia. reception fibers e32-c42 r25 * the fiber attachment is attached with adhesive and cannot be removed.
53 area-sensing models retroreflective fiber units special-beam models flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) 15 1 5 10 2.5 5 5 25 2 5 two, 3.2 dia. mounting holes 2,000 10.85 2 (brass/nickel plating) sensing surface: 32 0.265 dia. (emission and reception fibers in alternating arrangement) two, 2.2 dia. ??? e32-d36p1 special-beam models e32-r21 (an e39-r3 reflector is provided as an accessory.) r10 width 10, thickness 3 (polyacetal) washer (nbr) two, 1 dia. silicon tube sensing surface lends (pmma) 27.8 2.8 11 14 2,000 5 dia. 2.2 m60.75 m 6 0 . 7 5 (abs) 17.8 1 7 . 8 e39-f9: included 15.2 13 sensing surface lends (pmma) 7.2 15 7 16 (abs) two, 2.2 dia. standard length: 2 m two, m3 set screws (provided) (6) 8 27 2 7 10 1 0 21.5 2 1 . 5 21 22.5 17 mounting bracket e39-l4 (zinc-plated iron) provided e32-r16 (an e39-r1 reflector is provided as an accessory.) r25 mounting hole dimensions (recommended) (unit:mm) example: head size of e32-tc200 is m4. open the mounting holes with 4 to 4.5 dia. (unit:mm) example: head size of e32-t22 is 2 dia.. o pen the mounting holes with 2.2 to 2.4 dia. minimum bending radius (unit:mm ) outer diameter of fiber unit m3 m4 m6 m14 f dimensions 3 dia. 4 dia. 6 dia. 14 dia. outer diameter of fiber unit 1 dia. 1.5 dia. 2 dia. 3 dia. f dimensions 1.2 dia. 1.7 dia. 2.2 dia. 3.2 dia. outer diameter of fiber unit 3.5 dia. 4 dia. 5 dia. 6 dia. f dimensions 4 dia. 4.5 dia. 5.5 dia. 6.5 dia. f +0.5 0 +0.5 0 +0.5 0 +1 0 +0.2 0 +0.2 0 +0.2 0 +0.2 0 +0.5 0 +0.5 0 +0.5 0 +0.5 0 type a minimum bending radius b unbendable (except e32-c11n, e32-c31n and e32-cc200) 10 (e32-c11n, e32-c31n, e32-cc200r) 40 4 10 10 10 25 10 30 10 35 10 40 10 unbendable b minimum bending radius a sensing head flexible break-resistant fluororesin coating standard r @ r4 r10 r25 r30 r35 r40
54 convergent-reflective models fiber units with reflective sensors special-beam models flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) 3.5 7 3.5 5.5 2 2,000 two, 3.2 dia. mounting holes with two, 6 dia. countersinks on one side two, 1 dia. e39-f9: included (abs) 11 1 1 2.5 2 . 5 14 1 4 sensing surface E32-L24S r10 two, 2.2 dia. model display tube two, 3.2 dia.mounting holes with two, 6 dia. countersinks 7 2.7 10.6 6.8 0.95 (45) 2,000 14 1 4 20.5 2 0 . 5 3.8 3 . 8 sensing surface (pvc) e32-l16-n r25 sensing surface side-view prism (pc) 2,000 4 6 3.3 3.6 1.5 sensing distance 6.5 two, 3.2 dia. mounting holes with two, 6 dia. countersinks on both sides two, 1 dia. 18 1 8 4 20 2 0 e39-f9: included (polycarbonate) e32-l24l r10 e32-l25l r10 sensing distance two, 1 dia. 2,000 6 6.5 (polycarbonate) two, 3.2 dia. mounting holes with two, 6 dia. countersinks on both sides 4 1 8 1 6 sensing surface two, 3.2 dia. e39-f9: included two, 2.2 dia. 2,000 10 6.5 6.5 (heat-resistant abs) two, 3.2 dia. mounting holes with two, 6 dia. countersinks on one side sensing distance 5 5 20 2 0 20 2 0 sensing surface e32-l25 r25 note: there is a white line on the fiber that is inserted in the emitter-side port. e32-l25a r25 2,000 6.5 sensing distance 6.5 (heat-resistant abs) two, 2.2 dia. 10 two, 3.2 dia. mounting holes with two, 6 dia. countersinks on one side 5 5 20 2 0 20 2 0 sensing surface note: there is a white line on the fiber that is inserted in the emitter-side port.
55 convergent-reflective models special-beam models flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) a two, 4 dia. sensing surface two, 3.2 dia. mounting holes with two, 6 dia. countersinks on one side 5.5 5 . 5 25(b) 33.5 3 3 . 5 27 22.5 19 7 5 (max.) 2,000 4 dia. 8.9 18 1 8 * (sus304) two, 2.8 dia. flexible tubes (sus304) e32-l86 r25 note: the maximum allowable temperatures for sections a and b are 200 c and 110 c, respectively. the section inserted into the amplifier unit (indicated by *), however, must stay within the amplifier unit's operating temperature range. two, 4 dia. (sus304) two, 2.9 dia. flexible tubes (stainless steel) 6.50.1 2-m3 10.7 14 6.5 5 8.9 2.2 dia. 4 dia. mounting holes 18 1 8 18 a 25 2 5 2,000 30(b) sensing surface mounting holes two, 3.4 dia. two, 6.3 dia. countersinks e32-l64 r25 note: the maximum allowable temperatures are 300 c for section a and 110 c for section b (section inserted into the amplifier unit). e32-a10 r25 (abs) mounting holes two, 3.2 dia. two, 6.2 dia. countersinks model display tube: 3.3 dia. 70.1 2-m3 4 8.4 4 6 7 2 6 3.5 mounting holes 16.5 1 6 . 5 8 (45) two, 2.2 dia. 2,000 21 2 1 sensing surface mounting hole dimensions (recommended) (unit:mm) example: head size of e32-tc200 is m4. open the mounting holes with 4 to 4.5 dia. (unit:mm) example: head size of e32-t22 is 2 dia.. o pen the mounting holes with 2.2 to 2.4 dia. minimum bending radius (unit:mm ) outer diameter of fiber unit m3 m4 m6 m14 f dimensions 3 dia. 4 dia. 6 dia. 14 dia. outer diameter of fiber unit 1 dia. 1.5 dia. 2 dia. 3 dia. f dimensions 1.2 dia. 1.7 dia. 2.2 dia. 3.2 dia. outer diameter of fiber unit 3.5 dia. 4 dia. 5 dia. 6 dia. f dimensions 4 dia. 4.5 dia. 5.5 dia. 6.5 dia. f +0.5 0 +0.5 0 +0.5 0 +1 0 +0.2 0 +0.2 0 +0.2 0 +0.2 0 +0.5 0 +0.5 0 +0.5 0 +0.5 0 type a minimum bending radius b unbendable (except e32-c11n, e32-c31n and e32-cc200) 10 (e32-c11n, e32-c31n, e32-cc200r) 40 4 10 10 10 25 10 30 10 35 10 40 10 unbendable b minimum bending radius a sensing head flexible break-resistant fluororesin coating standard r @ r4 r10 r25 r30 r35 r40
56 heat-resistant models chemical-resistant models fiber units with reflective sensors environment-resistant models flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) sensing surface two, 1.5 dia. 4.9 two 2.2 dia. 13 3 17 1 7 2,000 m60.75 m 6 0 . 7 5 (brass/nickel plating) 3.1 width 10, thickness 2.4 (nickel-plated brass) washer (nickel-plated iron) e32-d51 r35 note: the maximum allowable temperature is 150 c. the maximum allowable temperature for continuous operation is 130 c. sensing surface 1.2 dia. 25(b) 2.2 dia. fluororesin tube * 4.5 5 8.5 sus303 m40.7 2.2 dia. 6.4 3 2 8 15 * 20 2 0 5 (70) a 2,000 protective tube 29. 5(b) m60.75 m 6 0 . 7 5 (sus303) width 10, thickness 2.4 (sus303) washer (sus) e32-d81r-s e32-d81r r10 r10 note 1. the maximum allowable temperatures for sections a and b are 200 c and 110 c, respectively. the section in- serted into the amplifier unit (indicated by *), however, must stay within the amplifier unit's operating temperature range. 2. order the fiber unit based on the amplifier unit. use the e32-d81r-s if the e3x- da @ -s, e3x-mda @ , or e3x-dac @ -s is used. use the e32-d81r if any other amplifier is used. using the e32-d81r-s using the e32-d81r a 25(b) 20 2 0 5 *3 2,000 2.2 dia. 5 dia. *2 sus flexible tube 3.5 dia. m40.7 *1 4.5 5 8.5 3 2 *2. the diameter is 6 dia. if the fiber length exceeds 10 m. *3. the diameter is 10 if the fiber length exceeds 10 m. 29.5(b) hexagonal caulking sus316l *1 8 6.4 15 m60.75 m 6 0 . 7 5 (sus303) sensing surface 1.4 dia. width 10, thickness 2.4 (sus303) washer (sus) e32-d61-s e32-d61 r25 r25 note 1. the maximum allowable temperatures for sections a and b are 350 c and 110 c, respectively. th e section insert- ed into the amplifier unit (indicated by *1), however, must stay within the ampli- fier unit's operating temperature range. 2. order the fiber unit based on the amplifier unit. use the e32-d61-s if the e3x-da @ -s, e3x-mda @ , or e3x-dac @ -s is used. use the e32-d61 if any other amplifier is used. using the e32-d61-s using the e32-d61 5 60 6 0 20 2 0 10 2,000 * 5 a b 29.5(c) 6.4 15 8 4 dia. hexagonal caulking sus316l sus flexible tube 2.8 dia. 2.5 dia. 1.65 dia. stainless-steel tube 1.25 dia. 25(c) 2.2 dia. * 4.5 5 8.5 sensing surface 1 dia. m40.7 m 4 0 . 7 (sus303) width 7, thickness 2.4 (sus304) washer (sus) e32-d73-s e32-d73 r25 r25 note 1. the maximum allowable tempera- tures for sections a, b, and c are 400 c, 300 c, and 110 c, respec- tively. the section inserted into the amplifier unit (indicated by *), how- ever, must stay within the amplifier unit's operating temperature range. 2. order the fiber unit based on the amplifier unit. use the e32-d @ -s if the e3x-da @ -s, e3x-mda @ , or e3xdac @ -s is used. use the e32-d @ if any other amplifier is used. using the e32-d73-s using the e32-d73 environment-resistant models 2,000 16 1 6 100 6 dia. 6 d i a . (fluororesin) 5 dia. two, 2.2 dia. e32-d12f r40 100 2,000 4.5 26 2 6 optical axis confirmation mark (red) 7 dia. 7 d i a . (fluororesin) two, 2.2 dia. e32-d14f r40
57 label-detection models liquid-level detection models application-corresponding fiber units flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) 1.6 4 23.5 9.4 1.6 9.2 24 2 4 r3.5 lens (pmma) 10 optical axis 20 (abs) 36.3 3 6 . 3 2,000 r1.6 r1.6 3.2 9 8.4 8 . 4 two, 2.2 dia. e32-g14 r25 two, 2.2 dia. reception side: sixteen, 0.265 dia. sensing surface emission side: sixteen, 0.265 dia. 2,000 15 1 5 13.25 4.4 eight, r0.5 r10 5 2 4 5 11.4 23.45 2 3 . 4 5 5 20.4 enlarged illustration of sensing surface e32-d36t r4 6 (pc) mounting holes 15.2 (13) 1.2 2.8 6 10 1 0 16 1 6 18 1 8 2,000 e39-f9: included two, 1 dia. sensing surface lens two, 3.2 dia. (pc) e32-l25t r10 mounting hole dimensions (recommended) (unit:mm) example: head size of e32-tc200 is m4. open the mounting holes with 4 to 4.5 dia. (unit:mm) example: head size of e32-t22 is 2 dia.. o pen the mounting holes with 2.2 to 2.4 dia. minimum bending radius (unit:mm ) outer diameter of fiber unit m3 m4 m6 m14 f dimensions 3 dia. 4 dia. 6 dia. 14 dia. outer diameter of fiber unit 1 dia. 1.5 dia. 2 dia. 3 dia. f dimensions 1.2 dia. 1.7 dia. 2.2 dia. 3.2 dia. outer diameter of fiber unit 3.5 dia. 4 dia. 5 dia. 6 dia. f dimensions 4 dia. 4.5 dia. 5.5 dia. 6.5 dia. f +0.5 0 +0.5 0 +0.5 0 +1 0 +0.2 0 +0.2 0 +0.2 0 +0.2 0 +0.5 0 +0.5 0 +0.5 0 +0.5 0 type a minimum bending radius b unbendable (except e32-c11n, e32-c31n and e32-cc200) 10 (e32-c11n, e32-c31n, e32-cc200r) 40 4 10 10 10 25 10 30 10 35 10 40 10 unbendable b minimum bending radius a sensing head flexible break-resistant fluororesin coating standard r @ r4 r10 r25 r30 r35 r40
58 liquid-level detection models models for glass-substrate alignment/mapping fiber units with reflective sensors application-corresponding fiber units flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) (pmma) (abs) two, 2.2 dia. emitter receiver (pbt) 20 27 4.2 5,000 31.2 3 1 . 2 19.9 1 9 . 9 optical axis e32-a01 r4 sensing surface (2 11)(pmma) optical axis (abs) (abs) 27 4.5 3 7 12 14.5 3.3 4.5 1.7 5,000 two, 2.2 dia. 17.8 1 7 . 8 31.5 3 1 . 5 21.5 2 1 . 5 e32-a02 r4 2,000 7.2 6 dia. 6 d i a . (fluororesin) fiber connector 9 dia. (brass/nickel plating) 8 dia. two, 2.2 dia. *2 to the amplifier unit length of unbendable section: 150 1 5 0 (350 3 5 0 ) *1 1,500 mm from the tip 2,000 a b 27 42 *1.( ): e32-d82f2 *2.the 2-m section of optical fiber on the amplifier-unit side is plastic and therefore allows free cutting. e32-d82f1 e32-d82f2 r40 r40 note: the maximum allowable temperatures for sections a and b are 200 c and 85 c, respectively. 1.1 2,000 sensing surface two, 3.2 dia. mounting holes with two, 6 dia. countersinks *2 two, 2.2 dia. *1 12 1 4 4 24.5 2 4 . 5 5 5 3.8 10.7 6.5 (abs) e32-a08 e32-a07e1 e32-a07e2 r25 r25 r25 *1 the e32-a07e1/e32-a07e2 has a reception fiber and an emission fiber. use the fiber with a model display tube (fiber with blue dotted line) as light emitting side. *2 e32-a08 : countersinks on one side e32-a07e1/e32-a07e2 : countersinks on both sides two, 2.8 dia. flexible tubes (sus304) 4 dia. 2.2 dia. two, 3.2 dia. mounting holes with 6 dia. countersinks on one side (sus303) sensing surface 36 3 6 5.5 5 . 5 18 1 8 * 1 7 3.3 21.7 a 5 2,000 25(b) e32-l66 r25 note: the maximum allowable temperatures for sections a and b are 300 c and 110 c, respectively. the section inserted into the am- plifier unit (indicated by *), however, must stay within the amplifier unit's operating temperature range. sensing surface 6.50.1 2-m3 1.5 4 dia. 8.6 (5) 4 10.7 6.5 mounting holes 4 dia. 2.2 dia. (sus303) flexible tube: two, 2.9 dia (stainless steel) sleeve (aluminum) a 30(b) 3,000 1 8 8 5 5 26 2 6 mounting holes two, 3.4 dia. two, 6.3 dia. countersinks e32-a08h2 r25 note: the maximum allowable temperatures for sections a and b are 300 c and 110 c, respectively.
59 wafer-mapping models flexible break-resistant fluororesin coating standard r @ cutting free (cutter provided) 2,000 two, 2.2 dia. 12 7 sensing surface lends 5 dia. two, 3.2 dia. mounting holes with two, 6 dia. countersinks on one side 8.9 23 2 3 9 9 20 2 0 (aluminum) e32-a09 e32-a09h r25 r35 28(b) 7 12 a 5 2,000 * (sus303) two, 2.8 dia. flexible tubes (sus304) two, 3.2 dia. mounting holes with two, 6 dia. countersinks on both sides sensing surface lends 5 dia. 4 dia. 2.2 dia. 8.9 30 3 0 9 9 24 2 4 e32-a09h2 r25 note: the maximum allowable temperatures for sections a and b are 300 c and 110 c, respectively. the section inserted into the amplifier unit (indicated by *), however, must stay within the amplifier unit's operating temperature range. e39-l83 mounting bracket (sus) (provided) 2 sensing surface: 2 dia. e39-f9: included (brass/nickel plating) stamp (1 dia.) two, r1.6 r1.6 2,000 0.4 1.8 3.2 10 11 17.6 3.2 3.4 4.3 3 dia. 3 d i a . 20.5 2 0 . 5 e32-a03 note: use the stamped surface and its opposing surface as installation (refer- ence) surfaces. 13 12.5 3 18.5 6.5 2,000 mounting holes two, 3.4 dia stamp (1 dia.) 1 dia. sensing surface 2 dia. (brass/nickel plating) 3 dia. 4.5 3.5 10 1 0 3 3 24.5 2 4 . 5 e39-f9: included e32-a03-1 r10 note 1. use the stamped surface and its opposing surface as installation (ref- erence) surfaces. 2. set of two symmetrical parts. 2 4 2,000 20.5 2 0 . 5 2 2 sensing surface: 1.2 dia. 2 dia. e39-f9: included (sus303) 1 dia. stamp (1 dia.) e32-a04 r10 note: use the stamped surface and its opposing surface as installation (refer- ence) surfaces. 17 21 2 1 3.5 2,000 1.2 4 10 2 (sus303) 2-m2 sensing surface 1.2 dia. installation (reference) surfaces 2.5 2 dia. 9 e39-f9: included 1 dia. 2 2 1.2 1 . 2 e32-a04-1 r10 note: set of two symmetrical parts. mounting hole dimensions (recommended) (unit:mm) example: head size of e32-tc200 is m4. open the mounting holes with 4 to 4.5 dia. (unit:mm) example: head size of e32-t22 is 2 dia.. o pen the mounting holes with 2.2 to 2.4 dia. minimum bending radius (unit:mm ) outer diameter of fiber unit m3 m4 m6 m14 f dimensions 3 dia. 4 dia. 6 dia. 14 dia. outer diameter of fiber unit 1 dia. 1.5 dia. 2 dia. 3 dia. f dimensions 1.2 dia. 1.7 dia. 2.2 dia. 3.2 dia. outer diameter of fiber unit 3.5 dia. 4 dia. 5 dia. 6 dia. f dimensions 4 dia. 4.5 dia. 5.5 dia. 6.5 dia. f +0.5 0 +0.5 0 +0.5 0 +1 0 +0.2 0 +0.2 0 +0.2 0 +0.2 0 +0.5 0 +0.5 0 +0.5 0 +0.5 0 type a minimum bending radius b unbendable (except e32-c11n, e32-c31n and e32-cc200) 10 (e32-c11n, e32-c31n, e32-cc200r) 40 4 10 10 10 25 10 30 10 35 10 40 10 unbendable b minimum bending radius a sensing head flexible break-resistant fluororesin coating standard r @ r4 r10 r25 r30 r35 r40
60 lens units accessories lens units e39-f1 material: brass for the body and optical glass for the lens itself. note: two per set. 4 dia. 8.9 m2.60.45 effective depth: 3. spot-facing depth side-view units e39-f2 material: brass for the body and optical glass for the lens itself. note: two per set. 4 dia. 2.8 dia. 9.2 5.7 m2.6 effective depth: 3.2 spot-facing depth: 0.9 3 18 8.5 3.6 12 8 0.2 6.5 6.4 m3 6 angle-settingscrew 6.4 two, 3.2 dia. m3 internally toothed washer two, 4 dia. two, m3 3 slotted-head set screws* 20.7 reflection unit with lens e39-f3 material: brass for the body and aluminum for the base. * secure the fiber head with the slotted-head set screws. do not insert a lens (e39-f1). lens unit for reflective fiber units e39-f3a note: this is the lens unit for the e32-d32 and e32- c42. material: aluminum for body and optical glass for lens. 23 13 3 m22 allen-head set screw (for securing the fiber) 2.1 dia. 6 dia. 4 dia. lens surface (lens diameter: 3.7 mm) lens unit for reflective fiber units e39-f3a-5 material: aluminum for body and optical glass for lens note: this is the lens unit for the e32-c31 and e32-c41. 6.5 16.5 lens surface (lens diameter: 3.7 mm) straight knurling 5 dia. 4 dia. 2.1 dia. m30.5 effective screw length: 3 lens unit for reflective fiber units e39-f3b material: aluminum for body and optical glass for lens. note: this is the lens unit for the e32-c31 and e32-c41. 25.2 lens surface (lens diameter: 4.8 mm) m30.5 depth: 4.4 24.1 5.5 dia. 6 dia. lens unit for reflective fiber units e39-f3c material: aluminum for body and optical glass for lens. note: this is the lens unit for the e32-c31 and e32-c41. straight knurling lens surface (lens diameter: 3.7 mm) m30.5 effective screw length: 3 10.9 5.8 4.3 dia. 5 dia.
61 protective spiral tubes e39-f32a/f32a5 e39-f32b/f32b5 6 dia. 12 l 12 3 dia. end cap (brass/nickel plating) tube 4.6 dia. (sus304) head connector (brass/nickel plating) m30.5 depth: 4 note 1. the length l is 1,000 for the e39-f32a/-f32b and 500 for the e39-f32a5/-f32b5. 2. the e39-f32b(5) consists of two e39-f32a(5)s. e39-f32c/f32c5 12 7 dia. l 12 end cap (brass/nickel plating) 4 dia. head connector (brass/nickel plating) m60.7 depth: 4 tube 5.6 dia. (sus304) note: the length l is 1,000 for the e39-f32c and 500 for the e39-f32c5. e39-f32d/f32d5 note: the length l is 1,000 for the e39-f32d and 500 for the e39-f32d5. 12 8.5 dia. l 12 5 dia. end cap (brass/nickel plating) head connector (brass/nickel plating) m60.75 depth: 4 tube 7 dia. (sus304)
62 other accessories accessories fiber cutter e39-f4 845 standard-fiber insertion hole 24.5 thin-fiber insertion hole thin-fiber attachments e39-f9 1.1 dia. 3.6 dia. 25 10 11.7 2.2 dia. material: abs note: two per set. *provided with thin-fiber models. fiber connector e39-f10 3.8 dia. 3 dia. 26 12.8 optical fiber: 2.2. dia. splice (polyester) retention clip (brass) retention clip (brass) optical fiber: 2.2. dia. 2 32.6 (48.6) 8 4-0.8 29.6 20.4 22.4 3.2 7.6 9.2 four, r0.8 four, 6 dia four, a (see note.) 27.4 33.8 note: dimension a varies with the model number as shown in the following table. dimension a model e39-f13 e39-f14 2.4 1.2 e39-f15 2.4/1.2 fiber connector e39-f13 e39-f14 e39-f15 sleeve bender e39-f11 10.8 27 42.5 10 10 r5 r7.5 r12.5 r10 mounting bracket e39-l83 1.8 17.6 11 3.5 4.3 0.4 two, r1.6 six, r1.2 r1.6 3.2 3.2 10 2.8
63 safety precautions refer to warranty and limitations of liability . this product is not designed or rated for ensuring safety of persons either directly or indirectly. do not use it for such purposes. do not use the product in atmospheres or environments that exceed product ratings. fiber units mounting tightening force the tightening force used to mo unt the fiber unit must not be more than the value given in ratings/characteristics. chemical-resistive models the following method is recommended to prevent the fluororesin case from cracking when the sensor is being secured. be especially careful not to crack the case when using screws to secure the sensor. fiber cutting procedure cut a thin fiber as follows: connection ? do not excessively pull or press the fiber unit. use a pulling force no higher than what is given in ratings/characteris- tics . ? do not bend the fiber unit beyond the permissible bending radius given under ordering information . ? do not bend the edge of the fiber units (excluding the e32-t @ r and e32-d @ r). ? do not apply excess force on the fiber units. the fiber head could be broken by excessive vibration. to prevent this, the following is effective: warning precautions for correct use screw-mounting model cylindrical model toothed washers spring mounting clip nuts ( attachment ) use a proper-sized wrench. retaining screw (flat head or sunken head) (m3 max.) fiber sensing head (1) the fiber is shipped loosely tightened as shown in the figure at the right. (2) adjust the fiber to the desired length and then tighten it securely. (3) insert the fiber to be cut into the e39-f4. (4) finished state (proper cutting state) thin fiber attachment (e39-f9) temporarily fitted cutter (e39-f4) two holes for thin fiber three holes for standard fiber (2.2-mm dia.) approx. 0.5 mm insertion direction n ote: insert the fi b er into the amplifier the direction indicated b y the arro w . amplifier unit fiber unit 10 mm min. 10 mm min. correct incorrect fiber unit nylon wireholder correct incorrect ta p e a one-turn loop can absorb vibrations.
64 e39-f11 sleeve bender ? the bending radius of the stainless steel tube should be as large as possible. the smalle r the bending radius becomes, the shorter the sensing distance will be. ? insert the tip of the stain- less steel tube to the sleeve bender and bend the stainless steel tube slowly along the curve of the sleeve bender. heat-resistant fiber units (e32-d51 and e32-t51) ? the fibers of these units cannot be extended using the e39- f10 fiber connector. ? the maximum allowable temperature for continuous opera- tion with these units is 130 c. it is 150 c for short-term use. e32-t14 and e32-g14 these units may enter the light-on state if there are reflecting objects at the ends of the lenses. in this case, attach the black stickers provided to the ends of the lenses. wafer sensors (e32-l25(a)) ? to ensure correct performance, insert the fiber with a white line into the emitter-side por t of the amplifier unit. e32-t16 and e32-t16p to use the slit provided, peel off the backing sheet, align it with the edg- es of the sensing surface, and at- tach it to the sensing head. use the slit in applications where saturation occurs (i.e., changes in light inten- sity cannot be obtained) due to short sensing distances. e32-m21 separate the 4 fibers by distances sufficient to prevent inter- ference. vacuum-resistant fiber units (e32-v) although flanges, fiber units on the vacuum side, and lens units have been cleaned, as an extra precaution, clean these products with alcohol before use in high-vacuum environ- ments to ensure that they are properly degreased. liquid-level detection sensors (e32-d82f) ? secure the fiber unit using the unbendable section. other- wise, the liquid-level detection position may be displaced. ? for applications in hazardous environments, install the fi- ber unit in the hazardous envir onment but install the ampli- fier unit in a safe environment. liquid-level detection sensors: tube-mounting models ? ensure that the tube is not deformed when using a band to secure the fiber unit. ? drops of water, bubbles, or haze inside the tube may cause malfunctions. e32-a07e1(e2) there is a difference in sensing object angle between e32-a07e1 and e32-a07e2. select a model in accordance with the bending direction of a sensing object. use the fiber with a model display tube as light emitting side. adjustment e32-g14 when a digital fiber amplifier is used, the sensing distance is short, making the incident light intensity large. this makes it impossible to teach without a workpiece. liquid-level (e32-d82f) detection position the liquid-level detection po- sition is at a distance of 5.2 2 mm from the end of the fluororesin section. (refer to the diagram on the right.) the liquid-level detection po- sition varies with the surface tension of the liquid and the deg ree of wetness at the fiber unit's detection position. other considerations liquid level (e32-d82f) ? operation may become unstable in the following cases: a bubbles stick to the cone of the sensing head. b solute is deposited on the cone of the sensing head. c the liquid has a high viscosity. ? there are some liquids, such as milky white liquids, for which detection is not possible. ? do not let the end of the fluororesin section bump into an- other object. damage to, or deformation of, the sensing head may result in unstable operation. heat-resistant fiber units (e32-d81r(-s), e32-d61(-s), and e32-d73(-s)) the pitch of the emission-side and reception-side fiber-inser- tion ports varies with the amplifier unit. be sure to use an ap- propriate fiber unit. chemical-resistant fiber and liquid level (e32-d82f) fluororesin has high chemical resist ance. however, applications in the atmosphere of vaporized chemic als (gases) or steam may cause malfunction or damage inside sensor s. run a full check before using in such environments. 1.2 mm dia. max. r12.5 mm r7.5 mm 1.3 mm dia. min. r10 mm fiber tip position mark stainless steel tube r5 mm 90 max. 10 mm 10 mm do not bend here. stickers slit provided e32-t16's sensing head example amplifier unit fiber unit e3x-da @ -s e3x-mda @ e32-d @ -s e3x-da @ -n e3x-na @ e32-d @ view from the cable drawing side sensing object emission emission reception reception e32-a07e2 e32-a07e1 liquid-level detection position 5.2 2 mm (from the end of the fluororesin section)
65 accessories use of e39-r3 reflector 1. use detergent, etc., to remove any dust or oil from the surfaces where tape is applied. adhesive tape will not be attached properly if oil or dust remains on the surface. 2. the e39-r3 cannot be used in places where it is exposed to oil or chemicals. e39-f32 @ protective spiral tubes 1. insert a fiber to the protective spiral tube from the head connector side (screwed) of the tube. 2. push the fiber into the protective spiral tube. the tube should be straight so that the fiber is not twisted when inserted. then turn the end cap of the spiral tube. 3. secure the protective spiral tube on a suitable place with the attached nut. 4. use the attached saddle to secure the end cap of the protective spiral tube. to secure the protective spiral tube at a position other than the end cap, apply tape to the tube so that the portion becomes thicker in diameter. e39-f10 fiber connector mount the fiber connector as shown in the following illustrations. 1. insert the fiber unit into the retention clip. 2. insert the retention clip into the splice. ? the fiber units should be as close as possible when they are connected. sensing distance will be reduced by approximately 25% when fibers are connected. ? only 2.2-mm dia. fibers can be connected. protective spiral tube fiber unit protective spiral tube fiber unit protective spiral tube toothed washer fiber unit hexagon clamping nut mounting panel end cap tube saddle retention unit fiber unit splice retention unit fiber unit fiber unit fiber unit
66
r ead and u nderstand this document please read and understand this document before using the products. please consult your omron repr esentative if you have any qu estions or comments. warranty omron?s exclusive warranty is that the products are free from def ects in materials and workmanship for a period of one year (or other period if specified) from date of sale by omron. omron makes no warranty or representation, express or implied, regarding non-infringement, merchantability, or fitness for particular purpose of the products. any buyer or user acknowledges that the buyer or user alone has determ ined that the products will suitabl y meet the requirements of their intended use. omron disclaims all other warranties, express or implied. limitations of liability omron shall not be responsible for special, indire ct, or consequential damages, loss of profits or commercial loss in any way connected with the produc ts, whether such claim is based on contract, warranty, negligence, or strict liability. in no event shall responsibility of omron for any act exceed the indivi dual price of the product on wh ich liability is asserted . in no event shall omron be responsible for warranty, repair, or other claims regarding the products unless omron?s analysis confirms that the pr oducts were properly handled, stored, installed, and maintained and not subject to contamination, abuse, misuse, or inappropriate modification or repair. suitability for use the products contained in this document are not safet y rated. they are not designed or rated for ensuring safety of persons, and should not be relied upon as a safety component or pr otective device for such purposes. please refer to separate cata logs for omron's safety rated products. omron shall not be responsible for conformi ty with any standards, codes, or regulations that apply to the combination of produc ts in the customer?s application or use of the product. at the customer?s request, omron will prov ide applicable third party certification documents identifying ratings and limitation s of use that apply to the products. this information by itself is not sufficient for a complete determination of the suitability of the products i n combination with the end product, machine, system, or other application or use. the following are some examples of applicati ons for which particular attention must be given. this is not intended to be an exh austive list of all possible uses of the products, nor is it intended to im ply that the uses listed may be suitable for the products: ? outdoor use, uses involving potential chem ical contamination or electr ical interference, or conditi ons or uses not described i n this document. ? nuclear energy control systems, combusti on systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. ? systems, machines, and equipment that c ould present a risk to life or property. please know and observe all prohibitions of use applicable to the products. never use the products for an application involving seri ous risk to life or property without ensuring that the system as a whole has been designed to address the risks, and that the omron product is properly rated and installed for the intended use wi thin the overall equipment or system. performance data performance data given in this document is provided as a guide for the user in determining suit ability and does not constitute a warranty. it may represent the result of omron?s test conditions, and the users mu st correlate it to actual application requirements. actual per formance is subject to the omron warranty and limitations of liability. change in specifications product specifications and accessories may be changed at any time based on improvements and other reasons. it is our practice to change model numbers when published ratings or features are ch anged, or when significant construction cha nges are made. however, some specifications of the product may be changed withou t any notice. when in doubt, special model numbers may be assi gned to fix or establish key specifications for your application on your request. please consult wi th your omron representative at any time to confirm actual specifications of purchased products. dimensions and weights dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. errors and omissions the information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assum ed for clerical, typographical, or proofreadi ng errors, or omissions. programmable products omron shall not be responsible for t he user?s programming of a programm able product, or any consequence thereof. copyright and copy permission this document shall not be copied for sales or promotions without permission. this document is protected by copyright and is intended solely for use in conjunction with the product. please notify us before copying or reproducing this document in any manner, for any other purpose. if copying or transmitting this document to another, please cop y or transmit it in its entirety.

▲Up To Search▲

Price & Availability of E32-L24S

	To Download E32-L24S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .